|
|
CATEGORIES
- 1/10 Electric kits & parts ( T1,T2,T3)
- 309901 W/PERSONAL NAME + COUNTRY FLAG + TEAM NAME SCREENED
- 5 MM BALL END, WITH THREAD - SHORT (6)
- 5 MM BALL END, WITH THREAD (6)
- ADDITIONAL XRAY ULTIMATE RACING SPRINGS (20)
- ADJ. REAR TURNBUCKLE L/R 25 MM - SPRING STEEL + BALL JOINT (2+4)
- ADJ. TURNBUCKLE L/R 20 MM - HUDY SPRING STEEL (2)
- ADJ. TURNBUCKLE L/R 22 MM + BALL JOINT (1+2)
- ADJ. TURNBUCKLE L/R 30 MM - HUDY SPRING STEEL (2)
- ADJ. TURNBUCKLE L/R 35 MM - HUDY SPRING STEEL (2)
- ADJ. TURNBUCKLE L/R 40 MM - HUDY SPRING STEEL (2)
- ADJUST. & NON-ADJUST. SHOCK PISTON CONVERSION SET
- ADJUSTABLE 5 MM BALL END - SPRING STEEL (2)
- ADJUSTABLE 5.8 MM BALL END - SPRING STEEL (2)
- ALU ADJ. TURNBUCKLE L/R 26 MM - SWISS 7075 T6 (2)
- ALU ADJ. TURNBUCKLE M3 L/R 39 MM - SWISS 7075 T6 (2)
- ALU ANTI-ROLL BAR COLLAR (2)
- ALU BALL END 5 MM (2)
- ALU COUNTERSUNK SHIM - ORANGE (4)
- ALU COUNTERSUNK SHIM (4)
- ALU DIFF LONG OUTPUT SHAFT - HARD COATED - 7075 T6
- ALU DIFF SHORT OUTPUT SHAFT - HARD COATED - 7075 T6
- ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 50MM
- ALU DRIVE SHAFT SWISS 7075 T6 - HARD COATED - 52MM
- ALU NUT FOR SUSP. PIVOT PIN (2)
- ALU REAR BULKHEAD BRACE
- ALU SERVO MOUNT - BLACK (2)
- ALU SHIM 3x5x1.0MM (10)
- ALU SHIM 3x6x1.0MM - ORANGE (10)
- ALU SHIM 3x6x1.0MM (10)
- ALU SHIM 3x6x2.0MM - ORANGE (10)
- ALU SHIM 3x6x2.0MM (10)
- ALU SHIM FOR LOWER SUSP. HOLDER 3x7.5x1.5 - BLACK (10)
- ALU SHIM FOR LOWER SUSP. HOLDER 3x7.5x1.5 (10)
- ALU SOLID LAYSHAFT T1FK'05
- ALU SOLID LAYSHAFT T1FK'05 (SET)
- ALU TOP DECK MOUNT (2)
- ALU XRAY SHOCK BODY (2)
- ANTENNA (2)
- ANTENNA MOUNT
- ANTI-ROLL BAR FRONT 1 MM
- ANTI-ROLL BAR FRONT 1.5 MM
- ANTI-ROLL BAR FRONT 2 MM
- ANTI-ROLL BAR MOUNTS (2)
- ANTI-ROLL BAR REAR 1.0 MM
- ANTI-ROLL BAR REAR 1.5 MM
- ANTI-ROLL BAR REAR 2.0 MM
- BALL DIFFERENTIAL WITH LABYRINTH DUST COVERS™ - SET - 7075 T6
- BALL END 4.9MM WITH THREAD 10MM (2)
- BALL END 4.9MM WITH THREAD 6MM (2)
- BALL END 4.9MM WITH THREAD 8MM (2)
- BALL JOINT 5 MM - OPEN (6)
- BALL JOINT 5 MM - SHORT OPEN (4)
- BALL JOINT 5 MM (6)
- BALL JOINT 5 MM UNIDIRECTIONAL - OPEN (4)
- BALL JOINT 5.8 MM (4)
- BALL UNIVERSAL 5.8 MM HEX (4)
- BALL UNIVERSAL 5.8 MM HEX (4+4) --- Replaced with #303241
- BALL-BEARING COMPOSITE BUSHING FOR C-HUB SUSP. (4)
- BATTERY HOLDER MOUNT WITH BALL END (2)
- BATTERY HOLDER MOUNT WITH THREAD (2)
- BATTERY HOLDER SYSTEM FOR 2 x 3 BAT. - COMPLETE SET
- BATTERY HOLDER SYSTEM FOR 4 BAT. - COMPLETE SET
- BATTERY MOUNT STRAP FOR 6-CELL CHASSIS - SET
- BELT TENSIONER SET
- BELT TENSIONER SET T2'007, T2'008
- BLACK HEX AND PHILLIPS SCREW SET FOR T1 (31)
- BODY CLIP (8)
- BODY CLIP FOR 6MM BODY POST (4)
- CHASSIS T1FK'05 - 2.0 MM GRAPHITE FOR 3700
- CHASSIS T1FK'05 - 2.5 MM GRAPHITE - CNC MACHINED
- CHASSIS T1FK'05 - 3.0 MM GRAPHITE - CNC MACHINED
- C-HUB BUSHING (4)
- C-HUB BUSHING COMPOSITE (4)
- COMPOSITE BALL DIFFERENTIAL - SET
- COMPOSITE BALL JOINT 5 MM - SHORT (4+2)
- COMPOSITE BATTERY HOLDERS FOR 2 x 3 BAT. - COMPLETE SET
- COMPOSITE BUMPER
- COMPOSITE BUMPER REAR
- COMPOSITE CHASSIS
- COMPOSITE C-HUB FRONT BLOCK, LEFT - HARD - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - HARD - CASTER 4.5°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - HARD - CASTER 6°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - MEDIUM - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - MEDIUM - CASTER 4.5°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - MEDIUM - CASTER 6°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - SOFT - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, LEFT - SOFT - CASTER 6°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - HARD - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - HARD - CASTER 4.5°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - HARD - CASTER 6°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - MEDIUM - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - MEDIUM - CASTER 4.5°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - MEDIUM - CASTER 6° ****Replaced by 302231****
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - SOFT - CASTER 3°
- COMPOSITE C-HUB FRONT BLOCK, RIGHT - SOFT - CASTER 6°
- COMPOSITE DIFF OUTPUT SHAFTS T2R
- COMPOSITE LOW TOP DECK MOUNT
- COMPOSITE NON-ADJUSTABLE PISTONS FOR ALU T2'008 SHOCK ABSORBERS - V2
- COMPOSITE PISTONS - ADJUSTABLE + NON-ADJUSTABLE (SET 2+6)
- COMPOSITE SERVO HORN - FUTABA, ROBE
- COMPOSITE SERVO HORN - KO, JR, AIRTRONICS, MULTIPLEX
- COMPOSITE SERVO MOUNT (2)
- COMPOSITE SET OF SERVO SHIMS (4)
- COMPOSITE SET OF SHIMS FOR ALU SHOCKS (2)
- COMPOSITE SET OF SHOCKS SHIMS & NUTS (2)
- COMPOSITE SET OF WHEELBASE SHIMS (3x1MM; 1x2MM) (2)
- COMPOSITE SHOCK TOWER FRONT
- COMPOSITE SHOCK TOWER REAR
- COMPOSITE STEERING BLOCK LEFT - 3 HOLES
- COMPOSITE STEERING BLOCK RIGHT - 3 HOLES
- COMPOSITE TRANSPORDER MOUNT
- COMPOSITE UPPER DECK
- COMPOSITE UPPER HOLDER FOR BUMPER
- COMPOSITE UPRIGHT REAR FOR C-HUB SUSPENSION
- DELRIN® SOLID AXLE BODY - LIGHTWEIGHT
- DELRIN® SOLID AXLE COMPLETE SET
- DIFF PULLEY 32T WITH LABYRINTH DUST COVERS
- DIFF PULLEY 34T WITH COVERS
- DIFF PULLEY 34T WITH LABYRINTH DUST COVERS
- DIFF WASHER - D 17 x 23 x 1 (2)
- DIFF WASHER 17 x 23 x 1 (2)
- DIFF WASHER+ BALL STEEL 2.4 MM ( 2+12 ) SET
- DRIVE SHAFT - 32 MM - SPRING STEEL (2)
- DRIVE SHAFT - 51 MM - SPRING STEEL - (FACTORY KIT) (2)
- DRIVE SHAFT COUPLING - SPRING STEEL (2)
- DRIVE SHAFT REPLACEMENT PLASTIC CAP 3 MM (4)
- DRIVE SHAFT REPLACEMENT PLASTIC CAP 3.5 MM (4)
- DUAL-ACKERMANN CENTRAL SERVO SAVER (SET)
- ECCENTRIC COMPOSITE HUB FOR BULKHEAD + COVERS (SET 4+2)
- ECCENTRIC NYLON HUB FOR REAR BULKHEAD (2+2)
- ECS DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
- ECS DRIVE SHAFT PIN 1.5 x 8 (2) - V2
- ECS DRIVE SHAFT PIN 1.5 x 9 WITH FLAT SPOT (2)
- EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 50MM - HUDY SPRING STEEL™
- EQUALIZED CORNERING SPEED (ECS) DRIVE SHAFT 52MM - HUDY SPRING STEEL™
- FIXED PULLEY 16T
- FIXED PULLEY 18T (2)
- FIXED PULLEY 20T (2)
- FLEXIBLE TOP DECK - GRAPHITE
- FLEXIBLE TOP DECK 1/12 - GRAPHITE
- FOAM BUMPER
- FRONT BODY MOUNT SET
- FRONT BODY MOUNT SET +1MM HEIGHT
- FRONT BODY MOUNT SET +2MM HEIGHT
- FRONT PIVOT PIN FOR C-HUB (2)
- FRONT WISHBONE LONG PIN LOWER - FOR ANTI-ROLL BAR (2)
- FRONT WISHBONE PIVOT PIN LOWER - SPRING STEEL (2)
- FRONT WISHBONE PIVOT PIN UPPER - SPRING STEEL (2)
- GRAPHITE MOTOR GUARD
- HARDENED PISTON RODS FOR KEYED PISTONS (2)
- HEX SCREW SET FOR T1 (30)
- HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 423 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 501 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 507 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT FRONT 3 x 513 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 180 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 183 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 186 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 189 MM
- HIGH-PERFORMANCE KEVLAR DRIVE BELT REAR 3 x 198 MM
- HIGH-SPEED BALL-BEARING 10 x 15 x 4 BLUE COVERED (12)
- IMPACT ABSORBING FRONT BUMPER
- INNER DRIVESHAFT ADAPTER - HUDY SPRING STEEL (2) --- Replaced with #305132
- INNER DRIVESHAFT ADAPTER 3.5MM - HUDY SPRING STEEL (2)
- LIPO BALANCING CHASSIS WEIGHTS
- LOWER ECCENTRIC SUSPENSION HOLDER ( 2+2)
- LOWER SUSPENSION HOLDER ( SET 2+1+1)
- LOWER SUSPENSION HOLDER INTEGRATED ( SET 10)
- MOUNTING HARDWARE - SET
- MULTI-DIFF LOCKING AXLE - HUDY SPRING STEEL
- MULTI-DIFF MAIN AXLE T1, T1EVO2, T1R, T1M, T1FK
- MULTI-DIFF MAIN AXLE T1FK'05, T2, T2R
- MULTI-DIFF MAIN AXLE T2'008
- NARROW PINION GEAR ALU HARD COATED 12T / 48
- NARROW PINION GEAR ALU HARD COATED 13T / 48
- NARROW PINION GEAR ALU HARD COATED 14T / 48
- NARROW PINION GEAR ALU HARD COATED 15T / 48
- NARROW PINION GEAR ALU HARD COATED 16T / 48
- NARROW PINION GEAR ALU HARD COATED 17T / 48
- NARROW PINION GEAR ALU HARD COATED 18T / 48
- NARROW PINION GEAR ALU HARD COATED 18T / 64
- NARROW PINION GEAR ALU HARD COATED 19T / 48
- NARROW PINION GEAR ALU HARD COATED 19T / 64
- NARROW PINION GEAR ALU HARD COATED 20T / 48
- NARROW PINION GEAR ALU HARD COATED 20T / 64
- NARROW PINION GEAR ALU HARD COATED 21T / 48
- NARROW PINION GEAR ALU HARD COATED 21T / 64
- NARROW PINION GEAR ALU HARD COATED 22T / 48
- NARROW PINION GEAR ALU HARD COATED 22T / 64
- NARROW PINION GEAR ALU HARD COATED 23T / 48
- NARROW PINION GEAR ALU HARD COATED 23T / 64
- NARROW PINION GEAR ALU HARD COATED 24T / 48
- NARROW PINION GEAR ALU HARD COATED 24T / 64
- NARROW PINION GEAR ALU HARD COATED 25T / 48
- NARROW PINION GEAR ALU HARD COATED 25T / 64
- NARROW PINION GEAR ALU HARD COATED 26T / 48
- NARROW PINION GEAR ALU HARD COATED 26T / 64
- NARROW PINION GEAR ALU HARD COATED 27T / 48
- NARROW PINION GEAR ALU HARD COATED 27T / 64
- NARROW PINION GEAR ALU HARD COATED 28T / 48
- NARROW PINION GEAR ALU HARD COATED 28T / 64
- NARROW PINION GEAR ALU HARD COATED 29T / 48
- NARROW PINION GEAR ALU HARD COATED 29T / 64
- NARROW PINION GEAR ALU HARD COATED 30T / 48
- NARROW PINION GEAR ALU HARD COATED 30T / 64
- NARROW PINION GEAR ALU HARD COATED 31T / 48
- NARROW PINION GEAR ALU HARD COATED 31T / 64
- NARROW PINION GEAR ALU HARD COATED 32T / 48
- NARROW PINION GEAR ALU HARD COATED 32T / 64
- NARROW PINION GEAR ALU HARD COATED 33T / 48
- NARROW PINION GEAR ALU HARD COATED 33T / 64
- NARROW PINION GEAR ALU HARD COATED 34T / 48
- NARROW PINION GEAR ALU HARD COATED 34T / 64
- NARROW PINION GEAR ALU HARD COATED 35T / 64
- NARROW PINION GEAR ALU HARD COATED 36T / 64
- NARROW PINION GEAR ALU HARD COATED 37T / 64
- NARROW PINION GEAR ALU HARD COATED 38T / 64
- OFFSET SPUR GEAR 104T / 64
- OFFSET SPUR GEAR 106T / 64
- OFFSET SPUR GEAR 108T / 64
- OFFSET SPUR GEAR 110T / 64
- ONE WAY LUBE 25ML
- O-RING / SHIM (4+4)
- PIVOT BALL 5.0 MM DOUBLE BEVEL SHOULDERS (10)
- PIVOT BALL 5.8 MM DOUBLE BEVEL SHOULDERS (10)
- PIVOT BALL 8.4 MM - SPRING STEEL (2)
- PRECISION BALANCING CHASSIS WEIGHTS (4 PCS.)
- PRECISION BALANCING CHASSIS WEIGHTS (CENTER - 3 PCS.)
- PRECISION BALANCING CHASSIS WEIGHTS (FRONT - 2 PCS.)
- PRECISION BALANCING CHASSIS WEIGHTS (REAR - 6 PCS.)
- REAR BODY MOUNT SET
- REAR BODY MOUNT SET +1MM HEIGHT
- REAR BODY MOUNT SET +2MM HEIGHT
- REAR PIVOT PIN FOR C-HUB - SPRING STEEL (2)
- REAR TURNBUCKLE L/R 25 MM - HUDY SPRING STEEL (2)
- REAR WISHBONE PIVOT PIN LOWER - S. STEEL - C-HUB (2)
- REAR WISHBONE PIVOT PIN LOWER - SPRING STEEL (2)
- REAR WISHBONE PIVOT PIN LOWER T1FK'05 (2)
- ROLL CENTER ALU HOLDER - SET (2)
- SCREW FOR EXTERNAL DIFF ADJUSTMENT - HUDY SPRING STEEL
- SERVO SAVER PLASTIC COVER - ECCENTRIC (2)
- SERVO SAVER T1FK'05
- SET OF ALU SHIM (0.5MM, 1.5MM, 2.5MM)
- SET OF ALU SHIM (1.0MM, 2.0MM, 3.0MM)
- SET OF BATTERY BACKSTOPS
- SHOCK ABSORBER MEMBRANES (4)
- SHOCK ADJ. NUT ALU + O-RING (4)
- SHOCK ADJ. NUT ALU + O-RING - ORANGE (4)
- SHOCK CAP-NUT ALU (2)
- SHOCK FOAM INSERTS (4)
- SHOCK TOWER 1/12 REAR - 2.5 MM GRAPHITE
- SHOCK TOWER FRONT - FACTORY KIT
- SHOCK TOWER FRONT 1/12 - GRAPHITE
- SHOCK TOWER FRONT FOR FOAM TIRES - GRAPHITE
- SHOCK TOWER REAR - 2.5 MM GRAPHITE (FACTORY KIT)
- SHORT SUSPENSION ARM - FRONT LOWER - C-HUB - HARD
- SHORT SUSPENSION ARM - FRONT LOWER - C-HUB ****Replaced by 302160****
- SHORT SUSPENSION ARM - REAR LOWER - C-HUB
- SHORT SUSPENSION ARM - REAR LOWER - C-HUB - HARD
- SILICONE GREASE 00
- SILICONE OIL 20W
- SILICONE OIL 25W
- SILICONE OIL 30W
- SILICONE OIL 35W
- SILICONE OIL 40W
- SILICONE OIL 50W
- SOLID ALU CENTRAL LAYSHAFT SET
- SPUR GEAR 112T / 64
- SPUR GEAR 114T / 64
- SPUR GEAR 116T / 64
- SPUR GEAR 118T / 64
- SPUR GEAR 78T / 48 - HARD
- SPUR GEAR 81T / 48 - HARD
- SPUR GEAR 84T / 48 - HARD
- SPUR GEAR 87T / 48 - HARD
- SPUR GEAR 90T / 48 - HARD
- SPUR GEAR 93T / 48 - HARD
- SPUR GEAR 96T / 48 - HARD
- SPUR GEAR 99T / 48 - HARD
- STEEL SHIM FOR LOWER SUSP. HOLDER 3x7.5x0.4 (10)
- STEEL SHIM FOR LOWER SUSP. HOLDER 3x7.5x0.75 (10)
- STEEL SHIM FOR LOWER SUSP. HOLDER 3x7.5x1.15 (10)
- STICKPACK HOLDER 1/12 - GRAPHITE
- T2 6-CELL GRAPHITE BATTERY STRAP (SET)
- T2 ADJ. UPPER DECK 2.5MM GRAPHITE - MULTI-FLEX TECHNOLOGY™
- T2 ALU 5 MM BALL END - ORANGE (2)
- T2 ALU 5 MM BALL END (2)
- T2 ALU C-HUB FRONT BLOCK - 0° DEG.
- T2 ALU C-HUB FRONT BLOCK, LEFT - 2° DEG
- T2 ALU C-HUB FRONT BLOCK, LEFT - 4° DEG
- T2 ALU C-HUB FRONT BLOCK, LEFT - 6° DEG.
- T2 ALU C-HUB FRONT BLOCK, RIGHT - 2° DEG.
- T2 ALU C-HUB FRONT BLOCK, RIGHT - 4° DEG.
- T2 ALU C-HUB FRONT BLOCK, RIGHT - 6° DEG.
- T2 ALU NUT FOR SUSP. HOLDER - ORANGE (2)
- T2 ALU NUT FOR SUSP. HOLDER (2)
- T2 ALU QUICK ROLL-CENTER HOLDER™ 4.9MM - L1 + L2
- T2 ALU QUICK ROLL-CENTER HOLDER™ 4.9MM - ORANGE (2+2)
- T2 ALU QUICK ROLL-CENTER HOLDER™ 4.9MM (2+2)
- T2 ALU REAR BULKHEAD BRACE
- T2 ALU SHOCK CAP-NUT WITH VENT HOLE - ORANGE (2)
- T2 ALU SHOCK CAP-NUT WITH VENT HOLE (2)
- T2 ALU SOLID LAYSHAFT
- T2 ALU STEERING BLOCK WITH BEARINGS
- T2 ALU SUSP. ADJUST. BULKHEAD FRONT LOWER
- T2 ALU SUSP. ADJUST. BULKHEAD REAR LOWER LEFT
- T2 ALU SUSP. ADJUST. BULKHEAD REAR LOWER RIGHT
- T2 ALU TOP DECK MOUNT FRONT (2)
- T2 ALU TOP DECK MOUNT REAR (2)
- T2 ALU UPPER CLAMP FOR BULKHEADS
- T2 ALU UPRIGHT 1° OUTBOARD TOE-IN (L+R)
- T2 ALU UPRIGHT 2° OUTBOARD TOE-IN (L+R)
- T2 ALU WHEEL HUB - BLACK (2)
- T2 ALU WHEEL HUB - OFFSET "+0.75MM" (2)
- T2 ALU WHEEL HUB - OFFSET "+1.5MM" (2)
- T2 ALU WHEEL HUB - OFFSET "-0.75MM" (2)
- T2 ALU WHEEL HUB (2)
- T2 ALU WHEEL SHIM OFFSET 0.75MM (2)
- T2 ANTI-ROLL BAR FRONT 1.2 + 1.4 + 1.6MM (SET)
- T2 ANTI-ROLL BAR FRONT 1.2 MM
- T2 ANTI-ROLL BAR FRONT 1.3 MM
- T2 ANTI-ROLL BAR FRONT 1.4 MM
- T2 ANTI-ROLL BAR FRONT 1.5 MM
- T2 ANTI-ROLL BAR FRONT 1.6 MM
- T2 ANTI-ROLL BAR FRONT 1.8 MM
- T2 ANTI-ROLL BAR REAR 1.1 MM
- T2 ANTI-ROLL BAR REAR 1.2 + 1.4 + 1.6MM (SET)
- T2 ANTI-ROLL BAR REAR 1.2 MM
- T2 ANTI-ROLL BAR REAR 1.3 MM
- T2 ANTI-ROLL BAR REAR 1.4 MM
- T2 ANTI-ROLL BAR REAR 1.5 MM
- T2 ANTI-ROLL BAR REAR 1.6 MM
- T2 BALL JOINT 5 MM - OPEN (4)
- T2 BALL JOINT 5 MM - OPEN (8)
- T2 BALL JOINT 5 MM UNIDIRECTIONAL - OPEN (4)
- T2 BALL-BEARING COMPOSITE BUSHING (4)
- T2 CHASSIS 2.5MM GRAPHITE - RUBBER-SPEC - MULTI-FLEX™
- T2 CHASSIS 3.5MM GRAPHITE - EXTRA-THICK - FOAM-SPEC
- T2 COMPOSITE ANTI-ROLL BAR HOLDERS
- T2 COMPOSITE BALL JOINT 5 MM - CLOSED (4)
- T2 COMPOSITE BUMPER
- T2 COMPOSITE C-HUB BUSHING (2+2)
- T2 COMPOSITE C-HUB FRONT BLOCK, LEFT - 2° DEG.
- T2 COMPOSITE C-HUB FRONT BLOCK, LEFT - 4° DEG.**** Replaced by 302364 ****
- T2 COMPOSITE C-HUB FRONT BLOCK, LEFT - 6° DEG. **** Replaced by 302366 ****
- T2 COMPOSITE C-HUB FRONT BLOCK, RIGHT - 2° DEG.
- T2 COMPOSITE C-HUB FRONT BLOCK, RIGHT - 4° DEG. **** Replaced by 302363 ****
- T2 COMPOSITE C-HUB FRONT BLOCK, RIGHT - 6° DEG. **** Replaced by 302365 ****
- T2 COMPOSITE C-HUB LEFT - 2° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB LEFT - 2° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE C-HUB LEFT - 4° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB LEFT - 4° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE C-HUB LEFT - 6° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB LEFT - 6° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE C-HUB RIGHT - 2° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB RIGHT - 2° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE C-HUB RIGHT - 4° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB RIGHT - 4° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE C-HUB RIGHT - 6° DEG. - HARD - FOAM-SPEC
- T2 COMPOSITE C-HUB RIGHT - 6° DEG. - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE FRAME SHOCK PARTS 4-STEP
- T2 COMPOSITE STEERING BLOCK
- T2 COMPOSITE STEERING BLOCK - HARD - FOAM-SPEC
- T2 COMPOSITE UPPER HOLDER FOR BUMPER
- T2 COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - HARD - FOAM-SPEC
- T2 COMPOSITE UPRIGHT 0° OUTBOARD TOE-IN - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - HARD - FOAM-SPEC
- T2 COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - LEFT - MEDIUM - RUBBER-SPEC
- T2 COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT
- T2 COMPOSITE UPRIGHT 1° OUTBOARD TOE-IN - RIGHT - HARD - FOAM-SPEC
- T2 COMPOSITE WHEEL HUB (2)
- T2 DRIVE AXLE - HUDY SPRING STEEL
- T2 DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™
- T2 DRIVE SHAFT 50MM - HUDY SPRING STEEL
- T2 DRIVE SHAFT COUPLING - HUDY SPRING STEEL
- T2 FOAM BUMPER
- T2 FOAM BUMPER - HARD
- T2 FRONT ARM PIVOT PIN (2)
- T2 FRONT BODY MOUNT SET 6MM
- T2 FRONT SUSPENSION ARM - EXTRA-HARD - FOAM-SPEC
- T2 FRONT SUSPENSION ARM - HARD - RUBBER-SPEC
- T2 FRONT SUSPENSION PIVOT PIN (2)
- T2 HARDENED SHOCK SHAFT (2)
- T2 IMPACT ABSORBING FRONT BUMPER
- T2 LOWER SUSPENSION HOLDERS (2+2+2)
- T2 MOUNTING HARDWARE PACKAGE - SET
- T2 PIVOT BALL 5.0 MM DOUBLE BEVEL SHOULDERS (10)
- T2 REAR ARM PIVOT PIN (2)
- T2 REAR BODY MOUNT SET 6MM
- T2 REAR SUSPENSION ARM - EXTRA-HARD - FOAM-SPEC
- T2 REAR SUSPENSION ARM - HARD - RUBBER-SPEC
- T2 REAR SUSPENSION PIVOT PIN (2)
- T2 REAR UPPER DECK 2.5MM GRAPHITE - CNC MACHINED
- T2 SERVO SAVER (SET)
- T2 SET OF COMPOSITE HUBS FOR BULKHEADS (4+2)
- T2 SET OF HIGH-SPEED BALL BEARINGS (18)
- T2 SHOCK BALL JOINT - OPEN (4)
- T2 SHOCK CAP-NUT ALU (2)
- T2 SHOCK TOWER FRONT 3.0MM GRAPHITE
- T2 SHOCK TOWER REAR 3.0MM GRAPHITE
- T2 SHOCK TOWER REAR 3.5MM GRAPHITE - ULTRA STRONG
- T2 STEEL STEERING BUSHING (2+2)
- T2 UPPER HOLDER FOR BUMPER - 2.5 MM GRAPHITE - CNC MACHINED
- T2 XRAY SHOCK ABSORBER-SET 4-STEP (2)
- T2'007 ALU LOW TOP DECK MOUNT (2)
- T2'007 ALU REAR LOWER SUSP. ADJUST. BULKHEAD
- T2'007 BALL END 5 MM WITH THREAD (2)
- T2'007 COMPOSITE SERVO HORN - FUTABA, ROBE
- T2'007 COMPOSITE SERVO HORN - KO, JR, AIRTRONICS
- T2'007 MOTOR MOUNT BULKHEAD
- T2'007 REAR UPPER DECK 2.5MM GRAPHITE - WIDE
- T2'007 RIGHT ALU LAYSHAFT BULKHEAD
- T2'007 SET OF COMPOSITE HUBS FOR BULKHEADS (4+2)
- T2'007 UPPER DECK - NARROW - RUBBER-SPEC - MULTI-FLEX™
- T2'007 UPPER DECK - WIDE - FOAM-SPEC - MULTI-FLEX™
- T2'007 UPPER DECK GRAPHITE - NARROW 2.0 MM - SET
- T2'008 5-CELL GRAPHITE BATTERY STRAP (SET)
- T2'008 ALU BALL DIFFERENTIAL - 34T & 38T - SET
- T2'008 ALU CHASSIS BRACE
- T2'008 ALU FRONT LOWER SUSP. ADJUST. BULKHEAD
- T2'008 ALU REAR LOWER SUSP. ADJUST. BULKHEAD
- T2'008 ALU SOLID AXLE DRIVESHAFT ADAPTERS (2) - HARD COATED
- T2'008 ALU SOLID LAYSHAFT
- T2'008 ALU T6 DIFF LONG OUTPUT SHAFT - HARD COATED
- T2'008 ALU T6 DIFF SHORT OUTPUT SHAFT - HARD COATED
- T2'008 ALU UPPER BULKHEAD
- T2'008 ALU XRAY SHOCK BODY FOR #308306 (2)
- T2'008 ASPHALT-SPEC UPPER DECK GRAPHITE + REAR UPPER DECK - SET
- T2'008 CHASSIS 2.5MM GRAPHITE - 5-CELL - RUBBER-SPEC
- T2'008 CHASSIS 2.5MM GRAPHITE - 6-CELL - RUBBER-SPEC
- T2'008 CHASSIS 3.5MM GRAPHITE - 6-CELL - FOAM-SPEC
- T2'008 COMPOSITE FRAME SHOCK PARTS 4-STEP - SHORT
- T2'008 COMPOSITE SOLID AXLE 34T - SET
- T2'008 COMPOSITE SOLID AXLE 38T - SET
- T2'008 COMPOSITE SOLID AXLE DRIVESHAFT ADAPTERS (2)
- T2'008 DIFF PULLEY 34T WITH LABYRINTH DUST COVERS
- T2'008 DIFF PULLEY 38T WITH LABYRINTH DUST COVERS
- T2'008 DRIVE SHAFT 52MM - HUDY SPRING STEEL
- T2'008 EU-SPEC COMPOSITE LAYSHAFT BUSHING (2)
- T2'008 FIXED PULLEY 16T (2)
- T2'008 FIXED PULLEY 20T (2)
- T2'008 FOAM-SPEC REAR UPPER DECK GRAPHITE
- T2'008 FOAM-SPEC UPPER DECK GRAPHITE
- T2'008 FRONT SUSPENSION ARM - EXTRA-HARD - FOAM-SPEC - 1-HOLE
- T2'008 FRONT SUSPENSION ARM - HARD - RUBBER-SPEC - 1-HOLE
- T2'008 HARDENED SHOCK SHAFT - SHORT (2)
- T2'008 HARDENED SHOCK SHAFT FOR ALU SHOCKS (2)
- T2'008 MOTOR MOUNT BULKHEAD
- T2'008 MOTOR MOUNT BULKHEAD - ORANGE
- T2'008 REAR SUSPENSION ARM - EXTRA-HARD - FOAM-SPEC - 1-HOLE
- T2'008 REAR SUSPENSION ARM - HARD - RUBBER-SPEC - 1-HOLE
- T2'008 REAR SUSPENSION PIVOT PIN (2)
- T2'008 RIGHT ALU LAYSHAFT BULKHEAD
- T2'008 RUBBER-SPEC REAR UPPER DECK GRAPHITE
- T2'008 RUBBER-SPEC UPPER DECK GRAPHITE
- T2'008 SET OF ECCENTRIC COMPOSITE HUBS "1" FOR BULKHEADS (4+2)
- T2'008 SHOCK TOWER FRONT 3.0MM GRAPHITE
- T2'008 SHOCK TOWER REAR 3.0MM GRAPHITE
- T2'008 SHOCK TOWER REAR 3.5MM GRAPHITE - ULTRA STRONG
- T2'008 XRAY SHOCK ABSORBER-SET 4-STEP - SHORT (2)
- T2'008|T2'009 FOAM-SPEC GRAPHITE PADS FOR LIPO - SET
- T2'008|T2'009 RUBBER-SPEC GRAPHITE PADS FOR LIPO - SET
- T2'009 - RUBBER-SPEC CONVERSION SET - 38T PULLEY
- T2'009 - RUBBER-SPEC CONVERSION SET - FORWARD MOTOR POSITION
- T2'009 ALU FRONT LOWER SUSP. ADJUST. BULKHEAD - ORANGE
- T2'009 ALU LOW TOP DECK MOUNT - ORANGE (2)
- T2'009 ALU REAR LOWER SUSP. ADJUST. BULKHEAD - ORANGE
- T2'009 ALU SOLID LAYSHAFT - ORANGE
- T2'009 ALU UPPER BULKHEAD - ORANGE
- T2'009 CHASSIS 2.5MM GRAPHITE - 6-CELL - RUBBER-SPEC
- T2'009 RIGHT ALU LAYSHAFT BULKHEAD - ORANGE
- T2'009 RUBBER-SPEC UPPER + REAR DECK 2.0MM GRAPHITE - SHORT- SET
- T2'009 XRAY SHOCK ABSORBER-SET 4-STEP - SHORT - ORANGE (2)
- T2R FRP CHASSIS - CNC MACHINED
- T2R FRP REAR UPPER DECK
- T2R FRP SHOCK TOWER FRONT
- T2R FRP SHOCK TOWER REAR
- T2R FRP UPPER DECK
- T2R PRO COMPOSITE BALL DIFFERENTIAL - SET
- T2R PRO COMPOSITE DIFF OUTPUT SHAFTS (L+R)
- T2R PRO FRP CHASSIS & UPPER DECKS F+R 2.5MM - CNC MACHINED
- T2R PRO FRP CHASSIS & UPPER DECKS F+R 2.5MM - CNC MACHINED
- TIMING BELT PULLEY 32T FOR FRONT ONE-WAY DIFF.
- TIMING BELT PULLEY 34T
- TIMING BELT PULLEY 38T FOR T2'008 MULTI-DIFF
- ULTRA FLEXIBLE TOP DECK - GRAPHITE (SET)
- UNIVERSAL SET OF PLASTIC SHIMS
- UPPER DECK - WIDE
- UPPER DECK EVO 2 - 2.5 MM GRAPHITE - CNC MACHINED
- UPPER DECK T1FK'05 - CNC MACHINED
- UPPER DECK T1FK'05 - CNC MACHINED - WIDE
- UPRIGHT REAR
- WHEEL AXLE - 22 MM - INTEGR. HEX HUB - HARD COATED (2)
- WHEEL AXLE FRONT WITH HEX HUB - SPRING STEEL (2)
- WHEELS MOUNTING HARDWARE - SMALL (4+4)
- WHEELS MOUNTING HARDWARE (4+4)
- XRAY ALU SHOCK ABSORBER-SET 4-STEP (2)
- XRAY ALUMINUM 1/10 TOURING SET-UP BOARD - LIMITED EDITION
- XRAY MULTI-DIFF T1, T1EVO2, T1R, T1M, T1FK
- XRAY MULTI-DIFF T1FK'05, T2, T2R
- XRAY MULTI-DIFF T2'008
- XRAY PROGRESSIVE SPRING-SET D=1.4 (14 LB) GOLD (4)
- XRAY PROGRESSIVE SPRING-SET D=1.5 (17.5 LB) SILVER (4)
- XRAY QUICK-SAVER™ - ADJUSTABLE SERVO SAVER SET
- XRAY QUICK-SAVER™ - ADJUSTABLE SERVO SAVER SET - ORANGE
- XRAY QUICK-SAVER™ - COMPOSITE SERVO SAVER PARTS
- XRAY SELECTED ULTIMATE RACING SPRINGS (24)
- XRAY SHOCK ABSORBER-SET 4-STEP (2)
- XRAY SPRING-SET C = 2.2 (2)
- XRAY SPRING-SET C = 2.4 (2)
- XRAY SPRING-SET C = 2.6 (2)
- XRAY SPRING-SET C = 2.8 (2)
- XRAY SPRING-SET C = 3.0 (2)
- XRAY SPRING-SET C = 3.2 (2)
- XRAY SPRING-SET C = 3.4 (2)
- XRAY SPRING-SET D=1.4 (14 LB) YELLOW - SUPER-SOFT (4)
- XRAY SPRING-SET D=1.5 (15 LB) BLUE-GREEN (4)
- XRAY SPRING-SET D=1.5 (17.5 LB) WHITE - SOFT (4)
- XRAY SPRING-SET D=1.6 (20 LB) LIGHT-BLUE (4)
- XRAY SPRING-SET D=1.6 (22.5 LB) BLUE - SOFT-MEDIUM (4)
- XRAY SPRING-SET D=1.7 (25 LB) DARK-BLUE (4)
- XRAY SPRING-SET D=1.7 (28 LB) VIOLET - MEDIUM (4)
- XRAY SPRING-SET D=1.8 (30 LB) LIGHT-PURPLE (4)
- XRAY SPRING-SET D=1.8 (33 LB) PURPLE - MEDIUM-HARD (4)
- XRAY SPRING-SET D=1.9 (35 LB) LIGHT-RED (4)
- XRAY SPRING-SET D=1.9 (38 LB) RED - HARD (4)
- XRAY T2'008 ALU SHOCK ABSORBER-SET - ORANGE (2)
- XRAY T2'008 ALU SHOCK ABSORBER-SET 4-STEP (2)
- XRAY T2R PRO - 1/10 RACING ELECTRIC TC
- XRAY T3 - 2012 Rubber-Spec
- 1/10 Nitro kits & parts (Nt-1)
- 1/8 Off Road kits and parts ( XB8-XB8T & 808)
- 4-HOLE COMPOSITE SHOCK PISTON SET - STRAIGHT - WIDE (2)
- ACTIVE CENTER DIFF OUTDRIVE ADAPTER - LIGHTWEIGHT - HUDY SPRING STEEL™ (2)
- ACTIVE CENTER DIFF SPUR GEAR 41T
- ACTIVE CENTER DIFF SPUR GEAR 42T
- ACTIVE CENTER DIFF SPUR GEAR 43T
- ACTIVE DIFF BEVEL GEAR COLLAR (2)
- ACTIVE DIFF CASE
- ACTIVE DIFF LARGE BEVEL GEAR 38T
- ACTIVE DIFF LARGE BEVEL GEAR 40T
- ACTIVE DIFF LARGE BEVEL GEAR 41T
- ACTIVE DIFF LARGE BEVEL GEAR 43T
- ACTIVE DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL™
- ACTIVE DIFF PIN (2)
- ACTIVE DIFF PIN 2x12 (2)
- ACTIVE DIFF SEGMENT 120° (2)
- ACTIVE DIFF SEGMENT 90° (2)
- ACTIVE DIFF STEEL BEVEL & SATELLITE GEARS (2+4)
- ADJ. TURNBUCKLE M3 L/R 45 MM - SPRING STEEL (2)
- ADJ. TURNBUCKLE M4 L/R 51 MM - HUDY SPRING STEEL (2)
- ADJ. TURNBUCKLE M5 L/R 35 MM - SPRING STEEL (2)
- ADJ. TURNBUCKLE M5 L/R 50 MM - SPRING STEEL (2)
- ADJ. TURNBUCKLE M5 L/R 58 MM - HUDY SPRING STEEL (2)
- ADJ. TURNBUCKLE M5 L/R 64 MM - HUDY SPRING STEEL (2)
- ADJUSTABLE ALU REAR HUB CARRIER LEFT
- ADJUSTABLE ALU REAR HUB CARRIER RIGHT
- AIR FILTER BODY & CAP
- AIR FILTER BODY & CAP - LOW PROFILE
- AIR FILTER ELBOW
- AIR FILTER ELBOW - LOW PROFILE
- AIR FILTER FOAM & OIL
- AIR FILTER FOAM & OIL - LOW PROFILE
- AIR FILTER SET
- AIR FILTER SET - LOW PROFILE
- ALU ADJ. ENGINE MOUNT - NOVAROSSI, RB, MAX, JP, SIRIO
- ALU ADJ. ENGINE MOUNT - PICCO, MEGA, ORION, LRP, OS
- ALU ADJ. TURNBUCKLE 64MM M5 L/R - SWISS 7075 T6 (2)
- ALU ADJ. TURNBUCKLE M5 L/R 58 MM - SWISS 7075 T6 (2)
- ALU CENTER DIFF MOUNTING PLATE 7075 T6 (3MM)
- ALU CENTER DIFF MOUNTING PLATE SET (2)
- ALU CHASSIS - CNC MACHINED 7075 T6 (3MM)
- ALU CHASSIS - HARDCOATED SWISS 7075 T6 (3MM) - V2
- ALU CLUTCH SHOES - LIGHT 1.71g - CNC MACHINED (3)
- ALU ENGINE MOUNT - CNC MACHINED
- ALU FRONT BRACE 7075 T6 (5MM)
- ALU FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (5MM)
- ALU FRONT LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
- ALU FRONT SHOCK BODY - HARD COATED - WIDE (2)
- ALU FRONT SHOCK BODY - HARD COATED (2)
- ALU FRONT SHOCK TOWER - CNC MACHINED 7075 T6 (4MM)
- ALU FRONT SHOCK TOWER - CNC MACHINED SWISS 7075 T6 (4MM) - V2
- ALU FRONT UPPER ARM HOLDER - 7075 T6 (5MM)
- ALU FUEL FILTER SET
- ALU MOUNTING BALL 6.8 - SWISS 7075 T6 - HARD COATED (4)
- ALU PIVOT BALL 6.8 - SWISS 7075 T6 - HARD COATED (4)
- ALU RADIO PLATE 7075 T6 (3MM)
- ALU RADIO PLATE 7075 T6 (3MM) - V2
- ALU REAR BRACE 7075 T6 (5MM)
- ALU REAR LOWER SUSP. HOLDER 0°-2° - FRONT - 7075 T6 (5MM)
- ALU REAR LOWER SUSP. HOLDER 0°-2°- REAR - 7075 T6 (5MM)
- ALU REAR LOWER SUSP. HOLDER 2°-4°- REAR - 7075 T6 (5MM)
- ALU REAR SHOCK BODY - HARD COATED - WIDE (2)
- ALU REAR SHOCK BODY - HARD COATED (2)
- ALU REAR SHOCK TOWER - CNC MACHINED 7075 T6 (4MM)
- ALU REAR WING MOUNT BRACE (2)
- ALU REAR WING SHIM (2)
- ALU SHOCK CAP NUT - WIDE (2)
- ALU SHOCK CAP NUT (2)
- ALU SHOCK PIVOT BALL WITH HEX - SWISS 7075 T6 - HARD COATED (2)
- ALU STAND FOR ENGINE MOUNT - NOVAROSSI, RB, MAX, JP, SIRIO
- ALU STAND FOR ENGINE MOUNT - PICCO, MEGA, ORION, LRP, OS
- ALU STEERING BLOCK LEFT
- ALU STEERING BLOCK RIGHT
- ALU STEERING PLATE 7075 T6 (3MM)
- ALU SUSPENSION HOLDERS I.S.S. - SET
- ALU TQ FRONT LOWER SUSP. HOLDER - FRONT - 7075 T6 (7MM)
- ALU TQ FRONT UPPER ARM HOLDER - 7075 T6 (8MM)
- ALU TQ REAR LOWER SUSP. HOLDER - REAR - 7075 T6 (5MM)
- ALU TQ REAR LOWER SUSP. HOLDER 2°-4° ANTI-SQUAT - FRONT - 7075 T6 (7MM)
- ALU TQ REAR SHOCK TOWER - CNC MACHINED 7075 T6 (4MM)
- ALU UPPER PLATE 7075 T6 (4MM)
- ALU WHEEL AXLE - HARD COATED (2)
- ALU WHEEL AXLE OFFSET "+1MM" - HARD COATED (2)
- ALU WHEEL AXLE OFFSET "+2MM" - HARD COATED (2)
- ALU WHEEL AXLE OFFSET "+5MM" - HARD COATED (2) - LIGHTWEIGHT
- ANTI ROLL BAR BALL JOINT 5.8 (4)
- BALL JOINT 5.8 (8)
- BALL MOUNT (2)
- BALL STUD 5.8MM (4)
- BALL STUD 5.8MM WITH BACKSTOP - V2 (2)
- BALL-BEARING SET - RUBBER COVERED FOR XB8 (24)
- BATTERY CABLE WITH SWITCH
- BEVEL DRIVE GEAR 12T
- BODY CLIP (10)
- BODY POSTS
- BRAKE CAM POST & ROD (2+2)
- BRAKE PAD FERODO (4)
- BRAKE/THROTTLE ARMS & STEERING SERVO ARMS - SET
- BRAKE/THROTTLE SYSTEM - SET
- CASTER CLIPS (2)
- CENTER DIFF LOWER PLATES (2)
- CENTER DIFF MOUNTING PLATE - SET
- CENTER DIFF MOUNTING PLATE SET - TALL
- CENTER DIFF OUTDRIVE ADAPTER - LIGHTWEIGHT - HUDY STEEL (2)
- CENTER DIFF OUTDRIVE ADAPTER (2) - HUDY STEEL
- CENTER DIFF SPUR GEAR 41T
- CENTER DIFF SPUR GEAR 42T
- CENTER DIFF SPUR GEAR 43T
- CENTER DIFF SPUR GEAR 44T
- CENTER DIFF SPUR GEAR 45T
- CENTER DIFF SPUR GEAR 46T
- CENTER DIFF SPUR GEAR 47T
- CENTER DIFF SPUR GEAR 48T
- CENTRAL CVD SHAFT UNIVERSAL JOINT - HUDY SPRING STEEL™
- CENTRAL CVD SHAFT UNIVERSAL JOINT - LIGHTWEIGHT - HUDY SPRING STEEL™
- CENTRAL DIFFERENTIAL - SET
- CHASSIS SIDE GUARDS L+R
- C-HUB LEFT
- C-HUB RIGHT
- CLOSED BALL JOINT 3.9 (4)
- CLUTCH BELL 13T
- CLUTCH BELL 14T
- CLUTCH BELL 15T
- CLUTCH BELL BALL-BEARING MR105ZZ 5x10x4 (2)
- CLUTCH SPRINGS - EXTRA HARD (3)
- CLUTCH SPRINGS - HARD (3)
- CLUTCH SPRINGS - MEDIUM (3)
- CLUTCH SPRINGS - SOFT (3)
- COMPOSITE ADJ. SHIM FOR REAR WING PLATE (2)
- COMPOSITE BUSHING & BALL MOUNT SET (2+2)
- COMPOSITE BUSHING FOR ALU STEERING BLOCK (4)
- COMPOSITE BUSHING FOR DIFF MOUNTING PLATE (2)
- COMPOSITE BUSHING FOR XB808 ALU CASTER BLOCK (2)
- COMPOSITE BUSHING FOR XB808 ALU REAR HUB CARRIER (2)
- COMPOSITE BUSHING FOR XB808 ALU STEERING BLOCK (1+1)
- COMPOSITE CENTER DIFF MOUNTING PLATE
- COMPOSITE FRAME SHOCK PARTS - WIDE
- COMPOSITE FRONT BRACE - V2
- COMPOSITE FRONT UPPER SUSP. HOLDER - REAR
- COMPOSITE FUEL FILTER SET
- COMPOSITE LOWER SUSP. HOLDERS SET
- COMPOSITE REAR BRACE - V2
- COMPOSITE REAR WING MOUNT BRACE (2)
- COMPOSITE REAR WING SHIM - BLACK (2)
- COMPOSITE SERVO SAVER
- COMPOSITE SET OF SHIMS FOR SHOCKS 0.7 & 1.3 MM
- COMPOSITE SHOCK ADJUSTABLE CLIPS
- COMPOSITE SHOCK BALL JOINT FOR SHOCK BOOT (2)
- COMPOSITE TUBING HOLDER FOR FUEL TANK (2)
- CVD DRIVE AXLE - HUDY SPRING STEEL™
- CVD DRIVE AXLE - LIGHTWEIGHT - HUDY SPRING STEEL™
- CVD DRIVE SHAFT COUPLING
- CVD FRONT UNIV. CENTR. DRIVE SHAFT - SET - HUDY SPRING STEEL™
- CVD REAR UNIV. CENTR. DRIVE SHAFT - SET - HUDY SPRING STEEL™
- CVD UNIVERSAL DRIVE SHAFT F/R - SET - HUDY SPRING STEEL™
- DIFF BULKHEAD BLOCK SET FRONT
- DIFF BULKHEAD BLOCK SET REAR
- DIFF GASKET (4)
- DIFF PIN (2)
- DIFFERENTIAL CASE
- ECCENTRIC BUSHING FOR ALU REAR HUB CARRIER (SET)
- ECCENTRIC BUSHING SET (2)
- EUROS'05 TQ FRONT SUSPENSION - SET
- EUROS'05 TQ REAR SUSPENSION - SET
- EXHAUST WIRE MOUNT SET
- EXHAUST WIRE MOUNT SET - LONG
- FELT SHIM FOR RUBBER SHORT SHOCK BOOT (4)
- FLYWHEEL
- FLYWHEEL COLLAR
- FLYWHEEL NUT - HUDY SPRING STEEL™
- FOAM WASHER FOR BODY POSTS (4)
- FRONT & REAR BUMPER
- FRONT ANTI-ROLL BAR 2.2MM
- FRONT ANTI-ROLL BAR 2.4MM
- FRONT ANTI-ROLL BAR 2.6MM
- FRONT ANTI-ROLL BAR 2.8MM
- FRONT ANTI-ROLL BAR 3.0MM
- FRONT ANTI-ROLL BAR 3.2MM
- FRONT DIFF LARGE BEVEL GEAR 38T
- FRONT DIFF LARGE BEVEL GEAR 41T
- FRONT DIFF OUTDRIVE ADAPTER - LONG (2)
- FRONT LOWER OUTER PIVOT PIN (2)
- FRONT LOWER SUSPENSION ARM - HARD
- FRONT LOWER SUSPENSION ARM - SOFT - LONG
- FRONT SHOCK ABSORBERS COMPLETE SET - WIDE (2)
- FRONT SHOCK ABSORBERS COMPLETE SET (2)
- FRONT SHOCK SHAFT - LONG (2)
- FRONT SHOCK SHAFT (2)
- FRONT TORQUE ROD SET
- FRONT TQ LOWER SUSPENSION ARM
- FRONT UNIVERSAL CENTRAL DRIVE SHAFT - SET - HUDY SPRING STEEL™
- FRONT UPPER ARM
- FRONT UPPER ARM BALL JOINT (2)
- FRONT UPPER PIVOT PIN (2)
- FRONT UPPER PIVOT PIN EUROS'05 TQ (2)
- FRONT XB8EC LOWER SUSPENSION ARM LEFT (HAND MODIFIED)
- FRONT XB8EC LOWER SUSPENSION ARM RIGHT (HAND MODIFIED)
- FRONT/REAR DIFF LARGE BEVEL GEAR 40T
- FRONT/REAR DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL™
- FRONT/REAR DIFFERENTIAL - SET
- FUEL FILTER MOUNT & TUBING HOLDERS
- FUEL TANK 123CC - SET - V3
- FUEL TANK 150CC - SET
- FUEL TANK 150CC - SET - V3
- FUEL TANK HOLDERS (2)
- FUEL TANK MOUNTING GROMMET (4)
- GRAPHITE CENTER DIFF MOUNTING PLATE
- GRAPHITE RADIO PLATE - V2
- GRAPHITE UPPER PLATE
- GRAPHITE VENTILATED BRAKE DISK - CNC MACHINED (2)
- HARDENED SHOCK SHIMS (4)
- LOWER INNER PIVOT PIN F/R (2)
- LOWER INNER PIVOT PIN F+R EUROS'05 TQ (2)
- LOWER INNER PIVOT PIN WITH GROOVE F/R (2)
- MOUNTING BALL 6.8 (4)
- MOUNTING HARDWARE PACKAGE FOR XB8 - SET OF 155 PCS
- MUD SCRAPER - GRAPHITE - SET
- PIN WITH FLAT SPOT o 2.5 x 15.8 (2)
- PIVOT BALL 5.8 (10)
- PIVOT BALL 6.8 (4)
- RADIO CASE SET
- REAR ANTI-ROLL BAR 2.4MM
- REAR ANTI-ROLL BAR 2.6MM
- REAR ANTI-ROLL BAR 2.8MM
- REAR ANTI-ROLL BAR 3.0MM
- REAR ANTI-ROLL BAR 3.2 MM
- REAR HUB CARRIER LEFT
- REAR HUB CARRIER RIGHT
- REAR LOWER OUTER PIVOT PIN (2)
- REAR LOWER SUSPENSION ARM LEFT - HARD
- REAR LOWER SUSPENSION ARM LEFT - SOFT - LONG
- REAR LOWER SUSPENSION ARM RIGHT - HARD
- REAR LOWER SUSPENSION ARM RIGHT - SOFT - LONG
- REAR SHOCK ABSORBERS COMPLETE SET - WIDE (2)
- REAR SHOCK ABSORBERS COMPLETE SET (2)
- REAR SHOCK SHAFT (2)
- REAR TQ LOWER SUSPENSION ARM LEFT
- REAR TQ LOWER SUSPENSION ARM RIGHT
- REAR UNIVERSAL CENTRAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- REAR UNIVERSAL CENTRAL DRIVE SHAFT - SET - HUDY SPRING STEEL™
- REAR UPPER INNER CAMBER LINK BALL JOINT (2)
- REAR UPPER OUTER CAMBER LINK BALL JOINT (2)
- REAR WING
- REAR WING - BLACK
- REAR WING - ORANGE
- REAR WING - PINK
- REAR WING - YELLOW
- REAR WING POSTS
- RELIEF REAR UPPER OUTER CAMBER LINK BALL JOINT (2)
- RELIEF STEERING BALL JOINT 5.8MM FOR M3 (2)
- RELIEF STEERING BALL JOINT 5.8MM FOR M4 (2)
- RUBBER SHORT SHOCK BOOT (4)
- SERVO BALL JOINT 5.8MM (4)
- SERVO SAVER COMPLETE SET - V2
- SHIM FOR ENGINE MOUNT (4)
- SHOCK BOOT (4)
- SHOCK PISTON SET - HARD (2)
- SHOCK PISTON SET - WIDE (2)
- SHOCK PIVOT BALL WITH HEX (2)
- SHOCK RUBBER MEMBRANE - WIDE (4)
- SHOCK RUBBER MEMBRANE (4)
- SILICONE DIFF OIL 50ML - "10 000"
- SILICONE DIFF OIL 50ML - "1000"
- SILICONE DIFF OIL 50ML - "20 000"
- SILICONE DIFF OIL 50ML - "2000"
- SILICONE DIFF OIL 50ML - "30 000"
- SILICONE DIFF OIL 50ML - "3000" --- Replaced with #359303
- SILICONE DIFF OIL 50ML - "5000" --- Replaced with #359305
- SILICONE DIFF OIL 50ML - "60 000"
- SILICONE DIFF OIL 50ML - "7000" --- Replaced with #359307
- SILICONE SHOCK OIL 50ML - "100"
- SILICONE SHOCK OIL 50ML - "150"
- SILICONE SHOCK OIL 50ML - "200"
- SILICONE SHOCK OIL 50ML - "250"
- SILICONE SHOCK OIL 50ML - "300"
- SILICONE SHOCK OIL 50ML - "350" --- Replaced with #359235
- SILICONE SHOCK OIL 50ML - "400" --- Replaced with #359240
- SILICONE SHOCK OIL 50ML - "450" --- Replaced with #359245
- SILICONE SHOCK OIL 50ML - "500" --- Replaced with #359250
- SILICONE SHOCK OIL 50ML - "600" --- Replaced with #359260
- SILICONE SHOCK OIL 50ML - "700"
- SILICONE SHOCK OIL 50ML - "800"
- SILICONE SHOCK OIL 50ML - "900"
- SILICONE TUBING 1M (2.4 x 5.5MM)
- SILICONE TUBING 1M (2.4 x 5.5MM) FLUORESCENT YELLOW
- STEEL BRAKE PAD - LASER CUT - HARDENED (4)
- STEEL BRAKE PAD - LASER CUT (4)
- STEEL DIFF BEVEL & SATELLITE GEARS (2+4)
- STEEL ECCENTRIC BUSHING 0° (2)
- STEEL ECCENTRIC BUSHING 1° (2)
- STEEL ECCENTRIC BUSHING 1° - V2 (2)
- STEEL ECCENTRIC BUSHING 2° (2)
- STEEL ECCENTRIC BUSHING 2° - V2 (2)
- STEEL STEERING BUSHING - LONG (2+2)
- STEEL STEERING BUSHING (2+2)
- STEEL SUSP. HOLDER - FRONT - LASER CUT
- STEERING BALL JOINT 5.8MM (4)
- STEERING BALL JOINT 5.8MM FOR M4 (2)
- STEERING BLOCK LEFT - V2 (HAND MODIFIED)
- STEERING BLOCK RIGHT - V2 (HAND MODIFIED)
- STEERING PLATE BUSHING (2)
- STEERING SERVO MOUNT - SET
- TRANSPONDER MOUNT
- TRUGGY WHEELS AERODISK - ORANGE (4)
- TRUGGY WHEELS AERODISK - PINK (4)
- TRUGGY WHEELS AERODISK - YELLOW (4)
- TRUGGY WHEELS STARBURST AERODISK - WHITE (4)
- UNIVERSAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- UNIVERSAL DRIVE SHAFT F/R - SET - HUDY SPRING STEEL™
- VENTILATED BRAKE DISK - LASER CUT - PRECISION-GROUND
- WHEEL NUT - HARD COATED (2)
- WHEEL NUT WITH COVER - HARD COATED (2)
- WHEELS STARBURST - ORANGE (4)
- WHEELS STARBURST - PINK (4)
- WHEELS STARBURST - WHITE (4)
- WHEELS STARBURST - YELLOW (4)
- XB808 ACTIVE DIFF OUTDRIVE ADAPTER - LIGHTWEIGHT - HUDY SPRING STEEL™ (2)
- XB808 ACTIVE DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL™
- XB808 ALU ADJUSTABLE REAR HUB CARRIER - SWISS 7075 T6 - HARD COATED + BALL BEARINGS
- XB808 ALU BEARING COLLAR FOR DIFF BEARINGS (2)
- XB808 ALU BRAKE CAM POST & ROD (2+2) HARD COATED
- XB808 ALU CASTER BLOCK 10° LEFT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 10° RIGHT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 12° LEFT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 12° RIGHT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 14° LEFT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 14° RIGHT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 16° LEFT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CASTER BLOCK 16° RIGHT - SWISS 7075 T6 - HARD COATED
- XB808 ALU CHASSIS - HARDCOATED SWISS 7075 T6 (3MM)
- XB808 ALU CVD DRIVE AXLE - SWISS 7075 T6 - HARD COATED (4)
- XB808 ALU ENGINE MOUNT - CNC MACHINED (L+R)
- XB808 ALU FRONT LOWER SUSP. HOLDER - FRONT - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU FRONT LOWER SUSP. HOLDER - REAR - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU FRONT LOWER SUSP. HOLDERS SET - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU FRONT SHOCK BODY - HARD COATED (2)
- XB808 ALU ONE-PIECE ENGINE MOUNT - SWISS 7075 T6 - HARD COATED
- XB808 ALU REAR BRACE SWISS 7075 T6 (5MM) - HARD COATED
- XB808 ALU REAR LOWER SUSP. HOLDER - FRONT - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU REAR LOWER SUSP. HOLDER 0°-2° - REAR - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU REAR LOWER SUSP. HOLDER 2°-4° - REAR - SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU REAR LOWER SUSP. HOLDERS SET- SWISS 7075 T6 (7MM) - HARD COATED
- XB808 ALU REAR SHOCK BODY - HARD COATED (2)
- XB808 ALU REAR SHOCK TOWER SWISS 7075 T6 (3MM) - HARD COATED
- XB808 ALU SHOCK BODY ADJ. NUT (2)
- XB808 ALU SHOCK BODY NUT (2)
- XB808 ALU SHOCK BODY NUT FOR SHOCK BOOT (2)
- XB808 ALU SHOCK CAP NUT - HARD COATED (2)
- XB808 ALU STAND FOR ENGINE MOUNT - NOVAROSSI, RB, MAX, JP, SIRIO - HARD COATED
- XB808 ALU STAND FOR ENGINE MOUNT - PICCO, MEGA, ORION, LRP, OS - HARD COATED
- XB808 ALU STEERING BLOCK LEFT - SWISS 7075 T6 - HARD COATED + BALL BEARINGS
- XB808 ALU STEERING BLOCK RIGHT - SWISS 7075 T6 - HARD COATED + BALL BEARINGS
- XB808 ALU STEERING PLATE SWISS 7075 T6 (3MM) - HARD COATED - 3 ACKERMANN POSITIONS
- XB808 BALL STUD 6.5MM (4)
- XB808 BALL-BEARING SET - RUBBER COVERED FOR XB808 (24)
- XB808 BODY POSTS
- XB808 BRAKE/THROTTLE SYSTEM - SET
- XB808 CENTER DIFF MOUNTING PLATE SET
- XB808 CENTRAL DIFFERENTIAL - SET
- XB808 CHASSIS SIDE GUARDS L+R
- XB808 CLUTCH BELL 15T WITH OVERSIZED 5x12x4MM BALL-BEARINGS
- XB808 CLUTCH BELL 16T WITH OVERSIZED 5x12x4MM BALL-BEARINGS
- XB808 CLUTCH BELL 17T WITH OVERSIZED 5x12x4MM BALL-BEARINGS
- XB808 CLUTCH BELL 18T WITH OVERSIZED 5x12x4MM BALL-BEARINGS
- XB808 CLUTCH BELL BALL-BEARING 5x12x4 (2)
- XB808 COMPOSITE BEARING HUB FOR DIFF (4)
- XB808 COMPOSITE CASTER BLOCK 12° LEFT - HAND MODIFIED
- XB808 COMPOSITE CASTER BLOCK 12° RIGHT - HAND MODIFIED
- XB808 COMPOSITE CASTER BLOCK 14° LEFT - HAND MODIFIED
- XB808 COMPOSITE CASTER BLOCK 14° RIGHT - HAND MODIFIED
- XB808 COMPOSITE CENTER DIFF MOUNTING PLATE
- XB808 COMPOSITE C-HUB LEFT
- XB808 COMPOSITE C-HUB RIGHT
- XB808 COMPOSITE ECCENTRIC BUSHING (2)
- XB808 COMPOSITE FRONT LOWER SUSP. HOLDERS SET
- XB808 COMPOSITE FRONT LOWER SUSPENSION ARM
- XB808 COMPOSITE PINION SEAL (2)
- XB808 COMPOSITE REAR BODY POST - LONG
- XB808 COMPOSITE REAR BRACE
- XB808 COMPOSITE REAR HUB CARRIER
- XB808 COMPOSITE REAR LOWER SUSP. HOLDERS SET
- XB808 COMPOSITE REAR LOWER SUSPENSION ARM
- XB808 COMPOSITE RELIEF STEERING BALL JOINT 6.3MM (2) - V2
- XB808 COMPOSITE SERVO SAVER
- XB808 COMPOSITE SET OF SHIMS FOR SHOCKS 1 & 2.5 MM
- XB808 COMPOSITE SHOCK 6-HOLE PISTON SET
- XB808 COMPOSITE SHOCK 6-HOLE PISTON SET (1.2; 1.3; 1.4MM)
- XB808 COMPOSITE SHOCK 6-HOLE PISTON SET (1.2; 1.3; 1.4MM)
- XB808 COMPOSITE SHOCK BUSHING & SHIM (2+2)
- XB808 COMPOSITE SHOCK PARTS
- XB808 COMPOSITE STEERING BALL JOINT 6.3MM (2) - V2
- XB808 COMPOSITE STEERING BLOCK LEFT - MOULDED-IN STEEL BUSHING
- XB808 COMPOSITE STEERING BLOCK RIGHT - MOULDED-IN STEEL BUSHING
- XB808 COMPOSITE UPPER PLATE
- XB808 CVD DRIVE AXLE - HUDY SPRING STEEL™
- XB808 CVD DRIVE SHAFT COUPLING - HUDY SPRING STEEL™
- XB808 CVD DRIVE SHAFT COUPLING THREADED - HUDY SPRING STEEL™
- XB808 CVD UNIVERSAL DRIVE SHAFT - HUDY SPRING STEEL™
- XB808 DIFF BULKHEAD BLOCK SET FRONT/REAR
- XB808 F/R DIFF OUTDRIVE ADAPTER - LIGHTW. - HUDY SPRING STEEL (2)
- XB808 F/R DIFF OUTDRIVE ADAPTER - LIGHTW. - HUDY SPRING STEEL™ (2)
- XB808 FELT SHIM FOR ALU SHOCK NUT (4)
- XB808 FOLDING SHOCK BOOT (4)
- XB808 FRONT ALU BRACE SWISS 7075 T6 (5MM) - HARD COATED
- XB808 FRONT ALU SHOCK TOWER SWISS 7075 T6 (3MM) - HARD COATED
- XB808 FRONT ANTI-ROLL BAR 2.0MM
- XB808 FRONT ANTI-ROLL BAR 2.2MM
- XB808 FRONT ANTI-ROLL BAR 2.4MM
- XB808 FRONT ANTI-ROLL BAR 2.6MM
- XB808 FRONT ANTI-ROLL BAR 2.8MM
- XB808 FRONT CENTRAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- XB808 FRONT SHOCK ABSORBERS + BOOTS COMPLETE SET (2)
- XB808 FRONT SHOCK ABSORBERS COMPLETE SET (2)
- XB808 FRONT UPPER ARM BALL JOINT (2) - V2
- XB808 FRONT/REAR DIFF OUTDRIVE ADAPTER (2) - HUDY SPRING STEEL™
- XB808 FRONT/REAR DIFFERENTIAL - SET
- XB808 GRAPHITE CENTER DIFF MOUNTING PLATE
- XB808 GRAPHITE FRONT SHOCK TOWER - CNC MACHINED 4 MM
- XB808 GRAPHITE RADIO PLATE
- XB808 GRAPHITE REAR SHOCK TOWER - CNC MACHINED 3.5 MM
- XB808 GRAPHITE STEERING PLATE
- XB808 GRAPHITE UPPER PLATE
- XB808 LOWER INNER PIVOT PIN SCREW 4MM (2)
- XB808 PINION GEAR 10T
- XB808 RADIO CASE SET
- XB808 REAR ANTI-ROLL BAR 2.2MM
- XB808 REAR ANTI-ROLL BAR 2.4MM
- XB808 REAR ANTI-ROLL BAR 2.6MM
- XB808 REAR ANTI-ROLL BAR 2.8MM
- XB808 REAR CENTRAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- XB808 REAR LOWER OUTER PIVOT PIN SCREW 3MM (2)
- XB808 REAR SHOCK ABSORBERS + BOOTS COMPLETE SET (2)
- XB808 REAR SHOCK ABSORBERS COMPLETE SET (2)
- XB808 REAR SHOCK SHAFT (2)
- XB808 REAR UPPER INNER CAMBER LINK BALL JOINT (2) - V2
- XB808 REAR UPPER OUTER CAMBER LINK BALL JOINT (2)
- XB808 SERVO SAVER COMPLETE SET - V2
- XB808 SET OF COMPOSITE LOWER ARM SHIMS
- XB808 SET OF COMPOSITE REAR HUB CARRIER SHIMS
- XB808 SHOCK RUBBER MEMBRANE (4)
- XB808 STEEL ARM BUSHING (2)
- XB808 STEEL SHOCK BUSHING (2)
- XB808 STEEL STEERING BUSHING (2)
- XB808 STEEL SUSP. HOLDER - FRONT - LASER CUT - HARDENED
- XB808 STEERING PLATE BUSHING (2)
- XB8EC UNIV. CENTR. DRIVE SHAFT - SET - HUDY SPRING STEEL™
- XRAY BODY FOR 1/8 OFF ROAD BUGGY - LIGHT
- XRAY BODY FOR 1/8 OFF ROAD BUGGY - V2
- XRAY BODY FOR 1/8 TRUGGY
- XRAY PREMIUM SILICONE OIL 10 000 cSt
- XRAY PREMIUM SILICONE OIL 100 000 cSt
- XRAY PREMIUM SILICONE OIL 100 cSt
- XRAY PREMIUM SILICONE OIL 1000 cSt
- XRAY PREMIUM SILICONE OIL 15 000 cSt
- XRAY PREMIUM SILICONE OIL 150 000 cSt
- XRAY PREMIUM SILICONE OIL 150 cSt
- XRAY PREMIUM SILICONE OIL 20 000 cSt
- XRAY PREMIUM SILICONE OIL 200 000 cSt
- XRAY PREMIUM SILICONE OIL 200 cSt
- XRAY PREMIUM SILICONE OIL 2000 cSt
- XRAY PREMIUM SILICONE OIL 250 cSt
- XRAY PREMIUM SILICONE OIL 30 000 cSt
- XRAY PREMIUM SILICONE OIL 300 000 cSt
- XRAY PREMIUM SILICONE OIL 300 cSt
- XRAY PREMIUM SILICONE OIL 3000 cSt
- XRAY PREMIUM SILICONE OIL 350 cSt
- XRAY PREMIUM SILICONE OIL 40 000 cSt
- XRAY PREMIUM SILICONE OIL 400 cSt
- XRAY PREMIUM SILICONE OIL 450 cSt
- XRAY PREMIUM SILICONE OIL 50 000 cSt
- XRAY PREMIUM SILICONE OIL 500 cSt
- XRAY PREMIUM SILICONE OIL 5000 cSt
- XRAY PREMIUM SILICONE OIL 550 cSt
- XRAY PREMIUM SILICONE OIL 60 000 cSt
- XRAY PREMIUM SILICONE OIL 600 cSt
- XRAY PREMIUM SILICONE OIL 6000 cSt
- XRAY PREMIUM SILICONE OIL 700 cSt
- XRAY PREMIUM SILICONE OIL 7000 cSt
- XRAY PREMIUM SILICONE OIL 80 000 cSt
- XRAY PREMIUM SILICONE OIL 800 cSt
- XRAY PREMIUM SILICONE OIL 8000 cSt
- XRAY PREMIUM SILICONE OIL 900 cSt
- XRAY SPRING-SET HARD DARK-BLUE (2+2)
- XRAY SPRING-SET MEDIUM LIGHT-BLUE (2+2)
- XRAY SPRING-SET SOFT WHITE (2+2)
- XRAY TRUGGY PIN TIRE - THRAX + FOAM INSERTS (4)
- XRAY XB8 ACTIVE DIFF™
- XRAY XB8 EC EDITION CONVERSION SET
- XRAY XB808 ACTIVE CENTER DIFF
- XRAY XB808 ACTIVE CENTER DIFF™
- XRAY XB808 ACTIVE DIFF™
- XRAY XB808 BODY FOR 1/8 OFF ROAD BUGGY
- XRAY XB808 BODY FOR 1/8 OFF ROAD BUGGY - LOW PROFILE
- XRAY XB808 FRONT SPRING SET C = 0.65 - WHITE (2)
- XRAY XB808 FRONT SPRING SET C = 0.70 - GREY (2)
- XRAY XB808 FRONT SPRING SET C = 0.75 - SILVER (2)
- XRAY XB808 FRONT SPRING SET C = 0.80 - LIGHT-BLUE (2)
- XRAY XB808 FRONT SPRING SET C = 0.86 - BLUE (2)
- XRAY XB808 FRONT SPRING SET C = 0.92 - VIOLET (2)
- XRAY XB808 FRONT SPRING SET C = 0.98 - PURPLE (2)
- XRAY XB808 REAR SPRING SET C = 0.47 - WHITE (2)
- XRAY XB808 REAR SPRING SET C = 0.50 - GREY (2)
- XRAY XB808 REAR SPRING SET C = 0.53 - SILVER (2)
- XRAY XB808 REAR SPRING SET C = 0.57 - LIGHT-BLUE (2)
- XRAY XB808 REAR SPRING SET C = 0.61 - BLUE (2)
- XRAY XB808 REAR SPRING SET C = 0.65 - VIOLET (2)
- XRAY XB808 REAR SPRING SET C = 0.70 - PURPLE (2)
- XRAY XT8 ACTIVE DIFF™
- XT8 ADJ. TURNBUCKLE M3 L/R 62 MM - HUDY SPRING STEEL™ (2)
- XT8 ADJ. TURNBUCKLE M4 L/R 86 MM - HUDY SPRING STEEL™ (2)
- XT8 ADJ. TURNBUCKLE M5 L/R 75 MM - SPRING STEEL (2)
- XT8 ADJ. TURNBUCKLE M5 L/R 91 MM - HUDY SPRING STEEL™ (2)
- XT8 ALU CHASSIS - HARDCOATED SWISS 7075 T6 (3MM)
- XT8 ALU CHASSIS - LONG - HARDCOATED SWISS 7075 T6 (3MM)
- XT8 ALU FRONT SHOCK BODY - HARD COATED (2)
- XT8 ALU FRONT SHOCK TOWER - CNC MACHINED SWISS 7075 T6 (4MM)
- XT8 ALU REAR BIG BORE SHOCK BODY - HARD COATED (2)
- XT8 ALU REAR SHOCK BODY - HARD COATED (2)
- XT8 ALU REAR SHOCK TOWER - CNC MACHINED SWISS 7075 T6 (4MM)
- XT8 BEVEL DRIVE GEAR 10T
- XT8 BODY POSTS - V2
- XT8 CVD UNIV. CENTR. DRIVE SHAFT - SET - HUDY SPRING STEEL™
- XT8 CVD UNIVERSAL CENTRAL DRIVE SHAFT FRONT - HUDY SPRING STEEL™
- XT8 CVD UNIVERSAL CENTRAL DRIVE SHAFT REAR - HUDY SPRING STEEL™
- XT8 CVD UNIVERSAL DRIVE SHAFT F/R - SET - HUDY SPRING STEEL™
- XT8 FRONT BIG BORE SHOCK ABSORBERS COMPLETE SET (2)
- XT8 FRONT LOWER SUSPENSION ARM LEFT
- XT8 FRONT LOWER SUSPENSION ARM RIGHT
- XT8 FRONT SHOCK ABSORBERS COMPLETE SET (2)
- XT8 FRONT SHOCK SHAFT (2)
- XT8 FRONT UPPER ARM LEFT
- XT8 FRONT UPPER ARM RIGHT
- XT8 FRONT/REAR DIFF LARGE BEVEL GEAR 43T
- XT8 GRAPHITE BODY PROTECTOR (F+R)
- XT8 GRAPHITE CENTER DIFF MOUNTING PLATE
- XT8 GRAPHITE FRONT SHOCK TOWER - CNC MACHINED 3.5MM
- XT8 GRAPHITE REAR SHOCK TOWER - CNC MACHINED 3.5MM
- XT8 GRAPHITE STEERING PLATE
- XT8 REAR BIG BORE SHOCK ABSORBERS COMPLETE SET (2)
- XT8 REAR BIG BORE SHOCK SHAFT (2)
- XT8 REAR LOWER SUSPENSION ARM
- XT8 REAR SHOCK ABSORBERS COMPLETE SET (2)
- XT8 REAR SHOCK SHAFT (2)
- XT8 UNIVERSAL CENTRAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- XT8 UNIVERSAL CVD DRIVE SHAFT - HUDY SPRING STEEL™
- XT8 UNIVERSAL CVD DRIVE SHAFT - LIGHTWEIGHT - HUDY SPRING STEEL™
- 1/12 & 1/10 WGT kits and parts ( XII & X10)
- 1/18 Micro kits and parts
- ADJ. TURNBUCKLE SET FOR TOE-IN ADJUSTMENT
- ADJ. TURNBUCKLE SET FOR TOE-IN ADJUSTMENT M18T
- ADJUSTABLE TURNBUCKLE 37MM
- ADJUSTABLE TURNBUCKLE 40MM
- ADJUSTABLE TURNBUCKLE 55MM
- AIR FILTER BODY
- AIR FILTER FOAM
- ALU ADJ. BALL DIFFERENTIAL - HARD COATED - SET
- ALU CLUTCH SHOES - CNC MACHINED (2)
- ALU DRIVE SHAFT - SET (2) - BLUE
- ALU DRIVE SHAFT FOR HEX ADAPTER - SET (2)
- ALU DRIVE SHAFT M18T - SET (2)
- ALU ENGINE MOUNT SET
- ALU HEAT SINK FOR MICRO STOCK MOTOR
- ALU HEAT SINK FOR SUPER SIZE MOTOR
- ALU MAIN DRIVESHAFT - SILVER
- ALU MAIN DRIVESHAFT M18T
- ALU MAIN DRIVESHAFT NT18
- ALU MAIN DRIVESHAFT NT18T
- ALU MOTOR HOLDER - STOCK, MOD. & SUPER SIZE MICRO MOTORS - M18
- ALU MOTOR HOLDER M18 PRO - 7075 T6 (5MM)
- ALU MOTOR HOLDER M18T - 7075 T6 (5MM)
- ALU SHOCK TOWER FRONT M18T - 7075 T6 (4MM)
- ALU SHOCK TOWER REAR M18T - 7075 T6 (4MM)
- ALU SUSPENSION BLOCK LEFT
- ALU SUSPENSION BLOCK RIGHT
- ALU WHEEL NUT (2)
- ANTENNA
- ANTI-ROLL BAR FRONT & REAR 1.0 MM
- ANTI-ROLL BAR FRONT & REAR 1.2 MM
- BALL DIFF D - WASHER (2)
- BALL DIFF WASHER 9x14x0.5 (2)
- BALL JOINT 5 MM - OPEN - SHORT (4)
- BALL-BEARING SET FOR M18, M18T, M18MT, NT18, NT18T (16)
- BATTERY HOLDER FOR 6-CELL IN-LINE BATT. PACK
- BEVELED DIFF. AXLE GEAR HOLDER
- BEVELED DIFF. GEAR FOR BALL DIFF.
- BODY 1/18 NITRO MT - PAINTED & TRIMMED - DRAGONFIRE - BLUE
- BODY 1/18 NITRO MT - PAINTED & TRIMMED - DRAGONFIRE - GREEN
- BODY 1/18 NITRO MT - PAINTED & TRIMMED - DRAGONFIRE - ORANGE
- BODY 1/18 NITRO MT - PAINTED & TRIMMED - DRAGONFIRE - RED
- BODY 1/18 NITRO TRUCK - PAINTED & TRIMMED - DRAGONFIRE - BLUE
- BODY 1/18 NITRO TRUCK - PAINTED & TRIMMED - DRAGONFIRE - GREEN
- BODY 1/18 NITRO TRUCK - PAINTED & TRIMMED - DRAGONFIRE - ORANGE
- BODY 1/18 NITRO TRUCK - PAINTED & TRIMMED - DRAGONFIRE - RED
- BRAKE CAM POST & ROD
- BRAKE DISK - LASER CUT - PRECISION-GROUND
- BRAKE DISK COLLAR (2)
- BRAKE PAD FERODO (2)
- BRAKE/THROTTLE SYSTEM SET
- CLUTCH BELL 16T WITH BEARINGS
- CLUTCH BELL 21T WITH BEARINGS
- CLUTCH BELL 23T WITH BEARINGS
- CLUTCH BELL 25T WITH BEARINGS
- CLUTCH SPRINGS 0.6MM (2)
- COMPOSITE ADJUSTABLE BALL DIFFERENTIAL
- COMPOSITE BATTERY HOLDER SET
- COMPOSITE BATTERY HOLDER SET M18T
- COMPOSITE BODY POST FOR MICRO MONSTER BODY (2)
- COMPOSITE BODY POSTS (4) + BODY CLIPS
- COMPOSITE DRIVE SHAFT - SET (2)
- COMPOSITE DRIVE SHAFT FOR HEX ADAPTER - SET (2)
- COMPOSITE DRIVE SHAFT SET M18T (2)
- COMPOSITE FRAME SHOCK PARTS INCL. O-RINGS
- COMPOSITE GEAR DIFF. + DRIVESHAFT PINION GEAR
- COMPOSITE MICRO CHASSIS
- COMPOSITE MICRO CHASSIS M18T
- COMPOSITE MOTOR HOLDER - SET
- COMPOSITE MOTOR HOLDER M18T
- COMPOSITE PINION SET (13,14,15,16)
- COMPOSITE PINION SET (17,19,21,23)
- COMPOSITE PINION SET (9,10,11,12)
- COMPOSITE REAR BODY POST HOLDER
- COMPOSITE SERVO ARMS - SET
- COMPOSITE SERVO MOUNT M18T (2)
- COMPOSITE SERVO MOUNT+ ANTENNA HOLDER - SET
- COMPOSITE SHIM FOR SERVO (2)
- COMPOSITE SHOCK ADJUSTABLE CLIPS (2)
- COMPOSITE SHOCK BODY SET (4)
- COMPOSITE SPUR GEAR ADAPTER
- COMPOSITE SUSPENSION BLOCK (2)
- COMPOSITE TOP DECK M18T
- COMPOSITE TOP DECK NT18MT
- COMPOSITE TOP DECK NT18T
- CONNECTING CABLE RECEIVER/BATT. PACK
- DRIVE SHAFT M18T - HUDY SPRING STEEL™ - SET (2)
- EXHAUST WIRE MOUNT SET
- FLYWHEEL
- FLYWHEEL COLLAR
- FLYWHEEL NUT
- FOAM BUMPER - BLACK
- FOAM BUMPER - BLUE
- FRONT ALU OIL SHOCK ABSORBERS (2)
- FRONT DIFF. AXLE
- FRONT FOAM TIRE MOUNTED (2) - HARD
- FRONT FOAM TIRE MOUNTED (2) - MEDIUM
- FRONT FOAM TIRE MOUNTED WITH HEX HUB (45DEG) - MEDIUM
- FRONT FOAM TIRE MOUNTED WITH HEX HUB (50DEG) - HARD
- FRONT MICRO SHOCK SHAFT M18T (2)
- FRONT ONE-WAY DIFFERENTIAL - SET - BLUE
- FUEL TANK 30CC
- GEAR SET FOR XRAY XMS01
- GEARBOX CASE
- GEARBOX CASE M18T
- GRAPHITE BATTERY HOLDER - BLACK
- GRAPHITE BATTERY HOLDER - BLUE
- GRAPHITE BATTERY HOLDER - SILVER
- GRAPHITE MAIN DRIVESHAFT M18, M18PRO
- GRAPHITE MAIN DRIVESHAFT M18T PRO
- GRAPHITE MAIN DRIVESHAFT M18T, M18MT
- GRAPHITE MICRO TRUCK CONVERSION SET - BLACK
- GRAPHITE MICRO TRUCK CONVERSION SET - BLUE
- GRAPHITE MICRO TRUCK CONVERSION SET - SILVER
- INNER DRIVESHAFT ADAPTER - SPRING STEEL (2)
- INNER WHEEL ADAPTORS, F+R (4)
- LINKAGE REAR M18T (2)
- LOWER FRONT & REAR BUMPER M18T
- LOWER FRONT BUMPER
- M18 NICKEL COATED PIVOT BALL 4.2 MM TYPE C (8)
- M18 NICKEL COATED PIVOT BALL 5.8 MM TYPE A (16)
- M18 NICKEL COATED PIVOT BALL 5.8 MM TYPE B (8)
- M18 PRO ALU WHEEL AXLE - OFFSET "+1.0MM" (2)
- M18 PRO ALU WHEEL AXLE - OFFSET "+2.0MM" (2)
- M18 PRO GRAPHITE SET - BLACK
- M18 PRO GRAPHITE SET - BLUE
- M18 PRO GRAPHITE SET - SILVER
- M18 UPPER HOLDER FOR BUMPER - GRAPHITE
- M18MT FRONT FOAM TIRE MOUNTED (42/47DEG) - PURPLE/ORANGE (2)
- M18MT R/F FOAM TIRE MOUNTED (42DEG) - PURPLE (2)
- M18MT REAR FOAM TIRE MOUNTED (25DEG) - WHITE (2)
- M18MT REAR FOAM TIRE MOUNTED (37DEG) - MAGENTA (2)
- M18T CONVERSION WHEEL HUBS FOR FOAM TIRES
- M18T FRONT FOAM TIRE MOUNTED (42/47DEG) - PURPLE/ORANGE (2)
- M18T NICKEL COATED PIVOT BALL 4.2 MM TYPE C (14)
- M18T NICKEL COATED PIVOT BALL 4.2 MM TYPE E (4)
- M18T NICKEL COATED PIVOT BALL 6.3 MM TYPE A (14)
- M18T NICKEL COATED PIVOT BALL 6.3 MM TYPE B (8)
- M18T NICKEL COATED PIVOT BALL 6.3 MM TYPE D (2)
- M18T PRO GRAPHITE CONVERSION SET
- M18T R/F FOAM TIRE MOUNTED (42DEG) - PURPLE (2)
- M18T REAR FOAM TIRE MOUNTED (25DEG) - WHITE (2)
- M18T REAR FOAM TIRE MOUNTED (37DEG) - MAGENTA (2)
- MAIN DRIVESHAFT PINION GEAR & COLLAR M18T
- METAL GEAR SET FOR XRAY XMS01MG
- MICRO 6-CELL GRAPHITE CHASSIS - CNC MACHINED
- MICRO BODY 1/18 956 - 150MM
- MICRO BODY 1/18 LAGO - 150MM
- MICRO BODY 1/18 MONSTER TRUCK
- MICRO BODY 1/18 NITRO TRUCK
- MICRO BODY 1/18 NT18 - F360
- MICRO BODY 1/18 TOURING - 150MM
- MICRO BODY 1/18 TRUCK PRO
- MICRO BODY CLIP (10)
- MICRO M18 GRAPHITE TOP DECK - CNC MACHINED
- MICRO MONSTER TRUCK TIRE - SKEW (4+4)
- MICRO MONSTER TRUCK TIRE & INSERT - CHEVRON (4+4)
- MICRO MONSTER TRUCK TIRE & INSERT - THRAX (4+4)
- MICRO SERVO SAVER
- MICRO SHOCKABSORBER MEMBRANES (4)
- MICRO TRUCK BODY 1/18 M18T
- MICRO TRUCK M18T PIN TIRE & INSERT - HARD (4+4)
- MICRO TRUCK M18T PIN TIRE & INSERT (4+4)
- MOUNTING HARDWARE PACKAGE FOR M18 - SET
- NT18 ALU CHASSIS - CNC MACHINED 7075 T6
- NT18MT ALU CHASSIS - CNC MACHINED 7075 T6
- RADIO PLATE & STANDS
- REAR ALU OIL SHOCK ABSORBERS (2)
- REAR FOAM TIRE MOUNTED (2) - MEDIUM
- REAR FOAM TIRE MOUNTED (2) - SOFT
- REAR FOAM TIRE MOUNTED WITH HEX HUB (35DEG) - SOFT
- REAR FOAM TIRE MOUNTED WITH HEX HUB (40DEG) - MEDIUM
- REAR MICRO SHOCK SHAFT M18T (2)
- RUBBER TIRES + INSERTS, F+R (40DEG)
- RUBBER TIRES + INSERTS, FRONT (50DEG)
- SET OF COMPOSITE PIVOT BALLS
- SET OF COMPOSITE PIVOT BALLS M18T
- SET OF FRONT LOWER SUSPENSION ARMS M18T (2)
- SET OF FRONT UPPER SUSPENSION ARMS M18T (2)
- SET OF LINKAGES + BALL JOINTS
- SET OF REAR LINKAGES 2.5° TOE-IN (2)
- SET OF REAR LOWER SUSPENSION ARMS M18T (2)
- SET OF REAR UPPER SUSPENSION ARMS M18T (2)
- SET OF STEERING PARTS
- SET OF SUSPENSION ARMS 6° CASTER - HARD (2)
- SET OF SUSPENSION ARMS 6° CASTER (2)
- SET OF SUSPENSION ARMS, LOWER + UPPER (2+1+1)
- SET OF SUSPENSION ARMS, LOWER + UPPER (2+1+1) - HARD
- SHIM FOR BRAKE HOLDER
- SHOCK ABSORBER - SET M18T (4)
- SHOCK TOWER FRONT & REAR M18T
- SILICONE TUBING 2.3 x 5.0 400MM CLEAR
- SPUR GEAR "H" 42T / 48
- SPUR GEAR "H" 54T / 48
- SPUR GEAR 36T / 48
- SPUR GEAR UNDERCOVER
- STEEL BRAKE PAD - LASER CUT (2)
- STEEL PINION GEAR 10T / 48
- STEEL PINION GEAR 11T / 48
- STEEL PINION GEAR 12T / 48
- STEEL PINION GEAR 13T / 48
- STEEL PINION GEAR 14T / 48
- STEEL PINION GEAR 15T / 48
- STEEL PINION GEAR 16T / 48
- STEEL PINION GEAR 17T / 48
- STEEL PINION GEAR 19T / 48
- STEEL PINION GEAR 21T / 48
- STEEL PINION GEAR 23T / 48
- STEEL PINION GEAR 9T / 48
- STEEL SPUR GEAR 54T / 48 + COMPOSITE SPUR GEAR ADAPTER
- STEEL SPUR GEAR 65T / 48 + COMPOSITE SPUR GEAR ADAPTER
- WHEEL AERODISK M18 PRO (HEX HUB) - RUBBER (2+2)
- XRAY BATTERY CABLE FOR MICRO BATT. PACK
- XRAY BATTERY PACK 5-CELL 1100mAh NiMH - 6.0V
- XRAY BATTERY PACK 6-CELL 1100mAh NiMH - 7.2V
- XRAY CHARGING CABLE FOR RECEIVER/BATT. PACK
- XRAY M18 - 4WD SHAFT DRIVE 1/18 MICRO CAR
- XRAY M18 POWER PACK
- XRAY M18 POWER PACK PRO
- XRAY M18 PRO - 4WD SHAFT DRIVE 1/18 MICRO CAR
- XRAY M18MT - 4WD SHAFT DRIVE 1/18 MICRO MONSTER TRUCK
- XRAY M18MT STARBURST WHEELS - ORANGE (4)
- XRAY M18MT STARBURST WHEELS - PINK (4)
- XRAY M18MT STARBURST WHEELS - YELLOW (4)
- XRAY M18MT STARBURST WHEELS (4)
- XRAY M18MT-RTR - 4WD SHAFT DRIVE 1/18 MICRO MONSTER TRUCK - LUXURY RTR
- XRAY M18-RTR - 4WD SHAFT DRIVE 1/18 MICRO CAR - LUXURY RTR
- XRAY M18T - 4WD SHAFT DRIVE 1/18 MICRO TRUCK
- XRAY M18T AERODISK WHEELS (4)
- XRAY M18T POWER PACK PRO
- XRAY M18T PRO - 4WD SHAFT DRIVE 1/18 MICRO TRUCK
- XRAY M18T WHEEL AERODISK - ORANGE (4)
- XRAY M18T WHEEL AERODISK - PINK (4)
- XRAY M18T WHEEL AERODISK - YELLOW (4)
- XRAY M18T-RTR - 4WD SHAFT DRIVE 1/18 MICRO TRUCK - LUXURY RTR
- XRAY MICRO CABLE FOR BATTERY CHARGING
- XRAY MICRO CABLE WITH FASTON CONNECTOR (SET)
- XRAY MICRO MOTOR 370 SUPERSIZE
- XRAY MICRO NITRO ELECTRONIC PACK
- XRAY MICRO SERVO XMS02MG - METAL GEAR
- XRAY MICRO SPEED CONTROLLER 180 WITH REVERSE
- XRAY MICRO SPEED CONTROLLER 300 WITH BRAKE
- XRAY MICRO SPEED CONTROLLER 300R WITH REVERSE
- XRAY MICRO STOCK MOTOR WITH PLUG
- XRAY MICRO WHEELS, F+R (4)
- XRAY NT18 - 4WD 1/18 MICRO NITRO CAR + ENGINE + MUFFLER
- XRAY NT18 - 4WD 1/18 MICRO NITRO CAR + ENGINE + MUFFLER + ELECTRIC PACK
- XRAY NT18MT - 4WD 1/18 MICRO NITRO MONSTER TRUCK - LUXURY RTR
- XRAY NT18T - 4WD 1/18 MICRO NITRO TRUCK - LUXURY RTR
- XRAY NT18T - 4WD 1/18 MICRO NITRO TRUCK + ENGINE + MUFFLER
- XRAY RECEIVER BATTERY PACK AAA 700mAh - 4.8V
- XRAY SPRING FRONT + REAR - SET M18T - SOFT-MEDIUM
- XRAY SPRING FRONT + REAR - SET NT18T - MEDIUM
- XRAY SPRING FRONT + REAR (4+4) - SET M18MT - SOFT
- Hardware
- Ball Bearings
- Washers and clips
- O-rings
- Roll Pins
- speciality tools, truers, boards & lubricants
- ABRASIVE DISK - SET
- ADAPTER FOR 1/18 XRAY M18 & HPI MICRO
- ADAPTER FOR 1/18 XRAY M18 PRO
- ADAPTER FOR 1/24 KYOSHO MINI-Z
- ALU CARRY CASE FOR COMM LATHES
- ALU CARRY CASE FOR TIRE TRUER
- ALU LOCK NUT FOR WHEEL ADAPTER 1/10 TOURING CAR
- ALU NUT FOR 1/10 TOURING SET-UP SYSTEM (4)
- ALU NUT FOR 1/8 OFF-ROD SYSTEM (4)
- ALU NUT FOR SET-UP TRIANGLE (4)
- ALU NUT M3 FOR 1/10 & 1/12 PAN CAR SET-UP SYSTEM (2)
- ALU SET-UP WHEEL FOR 1/10 RUBBER TIRES (4)
- ALU SET-UP WHEEL FOR 1/8 OFF-ROAD (4)
- ANGLE ADJUSTMENT WHEEL WITH SCREW
- ARM REAMER + REPL. TIP 3.0 x 120 MM
- ARM REAMER + REPL. TIP 3.5 x 120 MM
- ARM REAMER + REPL. TIP 4.0 x 120 MM
- AXLE SUPPORT PLATE
- CHASSIS BALANCING SIMPLE TOOL (2 PCS.)
- CHASSIS DROOP GAUGE 0 TO -13 MM FOR 1/8 OFF-ROAD & TRUGGY
- CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/10 CARS (10 MM)
- CHASSIS DROOP GAUGE -3 TO 10 MM FOR 1/8 CARS (20 MM)
- CHASSIS DROOP GAUGE SUPPORT BLOCKS (10 MM) FOR 1/10 (2)
- CHASSIS DROOP GAUGE SUPPORT BLOCKS (20 MM) FOR 1/8 (2)
- CHASSIS DROOP GAUGE SUPPORT BLOCKS (30 MM) FOR 1/8 OFF-ROAD (2)
- CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (1 MM STEPPED)
- CHASSIS RIDE HEIGHT GAUGE 0 MM TO 15 MM (BEVELED)
- CIRCUIT BOARD SET FOR 10 2002
- CLEANING BRUSH LARGE - MEDIUM
- CLEANING BRUSH LARGE - SOFT
- CLEANING BRUSH LARGE - STIFF
- CLEANING BRUSH SMALL - MEDIUM
- CLEANING BRUSH SMALL - SOFT
- CLEANING BRUSH SMALL - STIFF
- COLLECTING TRAY
- COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/10 TOURING CARS
- COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/8 OFF-ROAD CARS
- COMPLETE SET OF SET-UP TOOLS + CARRYING BAG - FOR 1/8 ON-ROAD CARS
- CUTTING HEAD FOR REAMER
- CUTTING TOOL FOR FOAM TIRES
- DIAMOND CUTTING TOOL - SELECTED
- DIFF SCREW M6
- EJECTOR PIVOT PIN FOR #106000
- ELECTRONIC PRINTED CIRCUIT BOARD 1500
- EXCLUSIVE ALU SET-UP SYSTEM FOR 1/8 OFF-ROAD CARS & TRUGGY
- EXHAUST SPRING / CASTER CLIP REMOVER
- FAKE TRANSPONDER FOR CHASSIS BALANCING
- FLAT SET-UP BOARD FOR 1/10 TOURING CARS
- FLAT SET-UP BOARD FOR 1/10 TOURING CARS - DARK GREY
- FLAT SET-UP BOARD FOR 1/10 TOURING CARS - SILVER GREY
- FLAT SET-UP BOARD FOR 1/10 TOURING CARS - TITAN
- FLAT SET-UP BOARD FOR 1/8 OFF-ROAD & TRUGGY
- FLAT SET-UP BOARD FOR 1/8 ON-ROAD
- FRONT PLEXI-HOLDER - RIGHT
- FRONT PLEXI-HOLDER LEFT
- FRONT PLEXI-HOLDER LEFT
- FRONT PLEXI-HOLDER LEFT
- FRONT PLEXI-HOLDER RIGHT
- FRONT PLEXI-HOLDER RIGHT
- FUSE 3A (3)
- FUSE 5x20 1.4A (3)
- FUSE 6,3x32 20A (10)
- GRINDING TOOL MOUNT WITH VERNIER 40 - 70 R
- GRINDING TOOL MOUNT WITH VERNIER 40 - 80 R
- GRINDING TOOL MOUNT WITH VERNIER 60 - 80 R
- HUDY 17MM OFF-ROAD WHEEL NUT TOOL
- HUDY ADVANCED COMM LATHE - BALL BEARING GUIDES
- HUDY ADVANCED COMM LATHE - HARDENED "V" GUIDES
- HUDY ADVANCED COMM LATHE - SLOT - HARDENED "V" GUIDES
- HUDY ALL-IN-ONE SET-UP SOLUTION FOR 1/10 TOURING CARS
- HUDY ALL-IN-ONE SET-UP SOLUTION FOR 1/8 ON-ROAD CARS
- HUDY AXIAL ADJUSTABLE SUPPORT - BALL BEARING GUIDES
- HUDY AXIAL ADJUSTABLE SUPPORT - HARDENED "V" GUIDES
- HUDY AXIAL ADJUSTABLE SUPPORT - SLOT - HARDENED "V" GUIDES
- HUDY BEARING GREASE
- HUDY BEARING GREASE - EXTRA
- HUDY BEARING GREASE - PREMIUM
- HUDY BEARING OIL
- HUDY BODY GAUGE 1/10 NITRO TOURING CARS
- HUDY CARBIDE CUTTER FOR FOAM TIRES
- HUDY DIFF GREASE
- HUDY DRIVE PIN REPLACEMENT TOOL (FOR 3MM PINS)
- HUDY ENGINE BREAK-IN BENCH
- HUDY EXCELLENT TIRE TRUER - FULLY AUTOMATIC 1/8, 1/10, 1/12 - FULL OPTION
- HUDY EXECUTIVE AUTOMATIC COMM LATHE - BALL BEARING GUIDES
- HUDY EXECUTIVE AUTOMATIC COMM LATHE - HARDENED "V" GUIDES
- HUDY EXECUTIVE AUTOMATIC COMM LATHE - SLOT - HARDENED "V" GUIDES
- HUDY FIBRE-REINFORCED TAPE - BLACK
- HUDY GRAPHITE GREASE
- HUDY GRAPHITE PINION CADDY
- HUDY GRAPHITE QUICK CAMBER GAUGE 1/10 TOURING 1.5°; 2°; 2.5°
- HUDY MICRO TIRE TRUER FOR 1/18 + 1/24
- HUDY MULTIPACK LATHE - BALL BEARING GUIDES
- HUDY MULTIPACK LATHE - HARDENED "V" GUIDES
- HUDY OFF-ROAD & TRUGGY CAR STAND
- HUDY ONE-WAY LUBE
- HUDY PERSONAL RACING DISPLAY
- HUDY POWER TIRE TRUER 1/8, 1/10, 1/12
- HUDY QUICK CAMBER GAUGE 1/8 OFF-ROAD 2°; 3°; 4°
- HUDY QUICK-TWEAK STATION + ALU CARRY CASE
- HUDY SLOT TIRE TRUER - AXLE 1/8" + 3/32" + MOTOR FRS + CABLE
- HUDY TECH COMM LATHE - BALL BEARING GUIDES
- HUDY TECH COMM LATHE - HARDENED "V" GUIDES
- HUDY TOURING CAR STAND
- HUDY ULTIMATE RACING STOPWATCH
- HUDY ULTIMATE SOLDER 3M LENGTH
- HUDY UNIVERSAL TIRE BALANCING STATION
- HUDY UNIVERSAL TIRE TRUER - 12 V 1/10 , 1/12
- KEVLAR DRIVE BELT FRONT 4 x 159 MM
- LEADING BAR (2)
- LONGITUDINAL SUPPORT (SET)
- MICRO START-BOX 1/18
- MOTOR CLUCTCH (SET)
- MOTOR PULLEY 3ST
- MOTOR SWITCH BOX WITH CONNECTION CABLE
- PINION PRESSER - SLOT CAR
- PINION PULLER - SLOT CAR
- PLASTIC AXIAL SHIM 6x12x0.8 (5)
- PLASTIC BOX FOR 101400
- PLASTIC BOX 10 1000
- PLASTIC BOX 101500
- PLASTIC CASE FOR 10 3100 (SET)
- PLASTIC CLIPS FOR ARMATURE (2)
- PLASTIC RING 6x12 (2)
- PLASTIC SET-UP BOARD DECAL FOR 1/10
- PLASTIC SET-UP BOARD DECAL FOR 1/8 OFF-ROAD & TRUGGY
- PLASTIC SET-UP BOARD DECAL FOR 1/8, 1/10
- PLEXI - TRIANGLE
- PLEXI GLASS COVER - SET
- PLEXI GLASS HOLDER FOR 102800
- PLEXIGLASS COVER
- PLEXI-HOLDER
- POWER CABLE WITH CLIPS
- POWER SWITCH (ON-OFF)
- PRIMARY FUSE 30A (3)
- PROPELLER COVER
- QUICK DOWNSTOP GAUGE TOOL 1.0 ~ 6.5MM
- REAMER FOR LEXAN BODIES 0-18 MM + COVER
- REAR PLEXI-HOLDER
- REAR PLEXI-HOLDER
- REAR PLEXI-HOLDER
- REAR PLEXI-HOLDER
- REAR PLEXI-HOLDER -SET
- REPL. TIP EXHAUST SPRING / CASTER CLIP REMOVER
- RIDE HEIGHT GAUGE STEPPED 1/10 & 1/12 PAN CARS
- RUBBER TRANSMITION BELT FOR 10 1000 (3)
- RUBBER TRANSMITION BELT FOR 10 1400 (3)
- RUBBER TRANSMITION BELT FOR 10 1403 (3)
- RUBBER TRANSMITION BELT FOR 10 1500 (3)
- RUBBER TRANSMITION BELT FOR 10 3100 (3)
- SELECTED STANDS - BALL BEARING GUIDES + BEARING CLIP
- SELECTED STANDS - HARDENED "V" GUIDES + BEARING CLIP
- SELECTED STANDS FOR MODIFIED - BALL-BEARING GUIDES
- SELECTED STANDS FOR MODIFIED - HARDENED "V" GUIDE
- SELECTED STANDS FOR SLOT - HARDENED "V" GUIDES (2)
- SET OF 18 ALU PINIONS 48P WITH CADDY 12T ~ 29T
- SET OF 18 ALU PINIONS 64P WITH CADDY 18T ~ 35T
- SET OF REPLACEMENT DRIVE SHAFT PINS 3x10 (10)
- SET OF REPLACEMENT DRIVE SHAFT PINS 3x12 (10)
- SET OF REPLACEMENT DRIVE SHAFT PINS 3x14 (10)
- SET-UP SYSTEM ON-ROAD 1/10: SERPENT, PICCO, MUGEN, NEO
- SHIM FOR CUTTING TOOL 0.2; 0.3; 0.5 (4)
- SLOT CAR WHEEL AXLE 2.0 MM
- SLOT CAR WHEEL AXLE 3.0 MM - 1/8"
- SLOT CAR WHEEL AXLE 3.0 MM - 3/32"
- STARTER WHEEL
- STOCK MOTOR HOLDER - SET
- TEFLON SHIM 6x10x2 (3)
- TEFLON WAY SHIM (2)
- TEFLON WAY SHIM - 1020-1 (2)
- TEFLON WAY SHIM - 1025-6 (2)
- THREE-CIRCUIT SWITCH
- TOOL HOLDER WITH VERNIER 40-70
- ULTRA-FINE CHASSIS DROOP GAUGE 4.0-6.6MM
- ULTRA-FINE CHASSIS RIDE HEIGHT GAUGE
- UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 & 1/12 PAN CARS
- UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 OFF-ROAD CARS 4WD
- UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/10 TOURING CARS
- UNIVERSAL EXCLUSIVE SET-UP SYSTEM FOR 1/8 ON-ROAD CARS
- UPSIDE MEASURE PLATE FOR 1/10 ON-ROAD
- UPSIDE MEASURE PLATE FOR 1/10 TOURING CARS
- UPSIDE MEASURE PLATE FOR 1/8 OFF-ROAD
- UPSIDE MEASURE PLATE FOR 1/8 ON-ROAD
- UPSIDE MEASURE PLATE FOR 1/8 TRUGGY
- WHEEL ADAPTER 1/10 - ALL TOURING CARS
- WHEEL ADAPTER 1/10 ON-ROAD - SERPENT, PICCO, MUGEN
- WHEEL ADAPTER 1/12 & 1/10 PAN CARS
- WHEEL ADAPTER 1/12 PAN CAR - (REPLACED BY 102375)
- WHEEL ADAPTER 1/18 - XRAY M18T, M18MT
- WHEEL ADAPTER 1/8 - SERPENT, MUGEN, KYOSHO, MOTONICA, SHEPHERD
- WHEEL ADAPTER FOR 1/10 OFF-ROAD CARS
- WHEEL ADAPTER FOR 1/10 TOURING CARS
- WHEEL ADAPTER FOR 1/5 ON-ROAD + 1/6 BUGGY
- WHEEL ADAPTER FOR 1/8 OFF-ROAD CARS, TRUGGY & RALLY GAME
- WHEEL ADAPTER FOR 1/8 ON-ROAD
- WHEEL PLEXI-HOLDER
- WRENCH-GLOWPLUG / CLUTCHNUT 10 MM - LONG
- Metric drivers
- Standard drivers
- Ball drivers
- Torx drivers
- Slot screwdrivers
- Philips screwdrivers
- Nut drivers
- Scissors, Pliers Turnbuckle wrench's
- Combo tool sets, pit bags & radio bags
- Miscelaneous
- Featured Products
DEPARTMENTSMANUFACTURERSTOPICS
|
|
